ACC 1101 PRINCIPLES OF ACCOUNTING I (6)

Introduces the basic concepts of the complete accounting cycle and provides the student with the necessary skills to maintain a set of books for a sole proprietorship.

Topics include:accounting vocabulary and concepts, the accounting cycle and accounting for a personal service business, the accounting cycle and accounting for a merchandising enterprise, and cash control. Laboratory work demonstrates theory presented in class.

Hours: Class/Week:4
D.Lab/Week: 4.00
Pre-requisites:Program admission

ACC 1102 PRINCIPLES OF ACCOUNTING II (6)

Applies the basic principles of accounting to specific account classifications and subsidiary record accounting.

Topics include: receivables, inventory, plant assets, payroll, payables, partnerships, and sales tax returns. Laboratory work demonstrates theory presented in class.

Hours: Class/Week:4
D.Lab/Week: 4.00
Pre-requisites:ACC 101

ACC 1103 PRINCIPLES OF ACCOUNTING III (6)

Emphasizes a fundamental understanding of corporate and cost accounting.

Topics include:accounting for a corporation, departmental accounting, cost accounting, and budgeting. Laboratory work demonstrates theory presented in class.

Hours: Class/Week:4
D.Lab/Week: 4.00
Pre-requisites:ACC 102

ACC 1104 COMPUTERIZED ACCOUNTING (3)

Emphasizes operation of computerized accounting systems from manual input forms.

Topics include:equipment use, general ledger, accounts receivable and payable, advanced payroll, and financial reports. Laboratory work includes theoretical and technical application.

Hours: Class/Week:1
D.Lab/Week: 4.00
Pre-requisites:ACC 102; SCT 100

ACC 105 Accounting Database Fund (3)

Emphasizes use of database management software packages for program-related database applications. Topics include: planning and designing a database; database creation; data entry; database access, manipulation, and updating; sort, index, and query functions; database program-related applications; and database management applications. Laboratory work includes theoretical and technical application.

Topics include:

Hours: Class/Week:1
D.Lab/Week: 4.00
Pre-requisites:SCT 100

ACC 1106 ACCOUNTING SPREADSHEET FUNDAMENTALS (3)

Provides instruction in the use of electronic spreadsheet software packages for program related spreadsheet applications. Students become proficient in creation, modification, and combination of spreadsheet.

Topics include:spreadsheet creation, data entry, data entry modification, computation using functions, and program-­related spreadsheet applications. Laboratory work includes theoretical and technical application.

Hours: Class/Week:1
D.Lab/Week: 4.00
Pre-requisites:SCT 100

ACC 107 Full – Time Accounting Internship (12)

Provides in-depth application and reinforcement of accounting and employability principles in an actual job setting. Allows the student to become involved in intensive on-the-job accounting applications that require full-time concentration, practice, and follow through. Topics include: appropriate work habits, acceptable job performance, application of accounting knowledge and skills, interpersonal relations, and progressive productivity. The full-time accounting internship is implemented through the use of written individualized training plans, written performance evaluation, weekly documentation or seminars and/or other projects as required by the instructor.

Topics include:

Hours: Class/Week:0
D.Lab/Week: 0.00
P.Lab/Week: 36.0
Pre-requisites:All non-elective courses required for program completion

ACC 108 HALF-TIME ACCOUNTING INTERNSHIP (6)

Introduces the application and reinforcement of accounting and employability principles in an actual job setting. Acquaints the student with realistic work situations and provides insights into accounting applications on the job.

Topics include: appropriate work habits, acceptable job performance, application of accounting knowledge and skills, interpersonal relations, and development of productivity. The half-time accounting internship is implemented through the use of written individualized train­ing plans, written performance evaluation, and two required seminars.

Hours: Class/Week:0
O.B.I/Week: 18.00
Pre-requisites:All non-elective courses required for program completion

ACC 150 Cost Accounting (6)

Emphasizes a thorough understanding of cost concepts, cost behavior, and cost accounting techniques as they are applied to manufacturing cost systems. Topics include job order cost accounting, process cost accounting, and standard cost accounting.

Topics include:

Hours: Class/Week:4
D.Lab/Week: 4.00
P.Lab/Week: 0.0
Pre-requisites:ACC 103

ACC 151 INDIVIDUAL INCOME TAX (4)

Provides instruction in Federal and State income tax return preparation for indi­viduals.

Topics include:dependency tests, gross income inclusions and exclusions, adjustments to income, itemized deductions, purchase and sale of principal residence, earned income credit, child care credit, small business (sole proprietor) income/loss and tax liability.

Hours: Class/Week:3
D.Lab/Week: 2.00
Pre-requisites:None

ACC 152 PAYROLL ACCOUNTING(4)

Provides an understanding of the laws that affect a company’s payroll structure and practical applications skills in maintaining payroll records.

Topics include: payroll and personnel records, computing wages and salaries, taxes affecting employees and employers, and analyzing and journalizing payroll transactions.

Hours: Class/Week:3
D.Lab/Week: 2.00
Pre-requisites:ACC 101

ACC 154 PERSONAL FINANCE (5)

Introduces practical applications of concepts and techniques used to manage per­sonal finance.

Topics include:case management, time value of money, credit, major purchasing decisions, insurance, investments, retirement, and estate planning.

Hours: Class/Week:5
D.Lab/Week: 0.00
Pre-requisites:None

ACC 155 Legal Environment of Business (5)

Introduces law and its relationship to business. Topics include: legal ethics, legal processes, business contracts, business torts and crimes, real and personal property, agency and employment, risk-bearing devices, and Uniform Commercial Code.

Topics include:

Hours: Class/Week:5
D.Lab/Week: 0.00
P.Lab/Week: 0.0
Pre-requisites:Program admission

ACC 156 Business Tax Accounting (4)

Provides instruction for preparation of both state and federal partnership, corporation and other business tax returns. Topics include: organization form, overview of taxation of partnership, special partnership issues, corporate tax elections, adjustments to income and expenses, tax elections, forms and schedules, tax credits, reconciliation of book and tax income, tax depreciation methods, and tax calculations.

Topics include:

Hours: Class/Week:3
D.Lab/Week: 2.00
P.Lab/Week: 0.0
Pre-requisites:ACC 101, ACC 151

ACC 157 Integrated Accounting Mgmt Systems (6)

Emphasizes use of database management packages, electronic spreadsheet packages, and accounting software packages for accounting/financial applications with more advanced systems. Topics include: creation and management of database applications, creation and management of spreadsheet applications, and creation and management of accounting integrated software systems.

Topics include:

Hours: Class/Week:2
D.Lab/Week: 8.00
P.Lab/Week: 0.0
Pre-requisites:ACC 106, ACC 103, ACC 104, SCT 100

ACC 158 Managerial Accounting (6)

Emphasizes the interpretation of data by management in planning and controlling business activities. Topics include: budgeting, capital investment decisions, price level and foreign exchange, analysis of financial statements, and internal reporting.

Topics include:

Hours: Class/Week:4
D.Lab/Week: 4.00
P.Lab/Week: 0.0
Pre-requisites:ACC 103

ACC 159 Accounting Simulation (5)

Develops skills for the potential accountant to effectively prepare financial statements for presentations and income tax returns. Emphasis is placed on providing students with opportunities for application and demonstration of skills associated with automated accounting. Topics include: financial statement preparation, accounting system installation, automated accounting work sheet preparation, automated accounting income tax return preparation, and job search planning.

Topics include:

Hours: Class/Week:1
D.Lab/Week: 9.00
P.Lab/Week: 0.0
Pre-requisites:ACC 104, ACC 106, SCT 100

ACC 160 Advanced Accounting Spreadsheet Applications (5)

Provide the fundamental, intermediate and advanced Microsoft Excel competencies to provide user with the skills necessary to obtain the expert user certification. Topics include spreadsheet creation, financial statements, forecast, amortization schedules, workgroup editing and advanced features such as macros, using charts, importing and exporting data, HTML creation, formulas, Web queries, built-in function, templates, and trends and relationships.

Topics include:

Hours: Class/Week:4
D.Lab/Week: 2.00
P.Lab/Week: 0.0
Pre-requisites:ACC 106

ACC 165 Capstone Review Course of Accounting Principles (6)

Guides the student in dealing with ethics, internal control, fraud and financial statement analysis in the accounting environment which will require students to confront and resolve accounting problems by integrating and applying skills and techniques acquired from previous courses. Will prepare students in developing a personal code of ethics by exploring ethical dilemmas and pressures they will face as accountants. Will help the student understand financial statement analysis and the relation to fraud, and fraud detection. Will prepare the student for the ACAT Comprehensive Examination for Accreditation in Accountancy.

Topics include:

Hours: Class/Week:4
D.Lab/Week: 4.00
P.Lab/Week: 0.0
Pre-requisites:ACC 101, ACC 102, ACC 103, ACC 150, ACC 152, ACC 156 or 2 year Associate degree in Accounting


ACR 100 SAFETY (1)

Provides instruction in procedures and practices necessary for safe operation of automotive collision repair facilities.

Topics include:work facility safety, work facility cleanliness, safety devices, fire prevention and safety, and environmental safety.

Hours: Class/Week:1
Lab/Week: 0.00
Pre-requisites:Provisional admission

ACR 101 AUTOMOBILE COMPONENTS IDENTIFICATION (3)

Introduces the structural configuration and identification of the structural members of various automotive unibodies and frames.

Topics include:unibody construction, frame types, stub frame types, body panels, and mechanical components.

Hours: Class/Week:3
D.Lab/Week: 1.00
Pre-requisites:Provisional admission, ACR 100

ACR 102 EQUIPMENT AND HAND TOOLS IDENTIFICATION (1)

Introduces equipment and hand tools used in automotive collision repair.

Topics include: safety procedures, hand tools identification, power hand tools identification, air supply systems, and hydraulic systems.

Hours: Class/Week:1
D.Lab/Week: 1.00
Pre-requisites:Provisional admission, ACR 100

ACR 104 MECHANICAL AND ELECTRICAL SYSTEMS(2)

Introduces various mechanical and electrical systems requiring repair of damages incurred through automobile collisions.

Topics include: engine accessory systems, emission control systems, air conditioning systems, braking systems, steering column damage, engine removal and replacement sequence, lighting systems, engine wiring, power accessories systems, and restraint systems.

Hours: Class/Week:1
P.Lab/Week: 3.00
Pre-requisites:Program admission, ACR 100, ACR 101, ACR 102

ACR 105 BODY FIBERGLASS, PLASTIC, AND RUBBER REPAIR TECHNIQUES(3)

Provides instruction in non-metallic auto body repair techniques.

Topics include: cracked or splintered area repair, bonding agent usage, fiberglass and plastic body parts removal and replacement procedure, partial fiberglass header panel replacement procedure, plastics identification, plastic and rubber welding techniques, and Sheet Molded Compound (SMC) repairs.

Hours: Class/Week:1
D.Lab/Week: 2.00
P.Lab/Week: 5.00
Pre-requisites:Program admission, ACR 100, ACR 101, ACR 102

ACR 106 WELDING AND CUTTING(4)

Introduces welding and cutting procedures used in auto collision repair. Emphasis will be placed on MIG welding techniques.

Topics include:welding, oxyfuel welding, metal cutting techniques, resistance welding, unibody welding techniques, weld removal techniques and safety procedures, and plasma arc cutting.

Hours: Class/Week:2
D.Lab/Week: 2.00
P.Lab/Week: 3.00
Pre-requisites:ACR 100, ACR 107

ACR 107 TRIM, ACCESSORIES, AND GLASS(2)

Provides instruction in removal and replacement methods of a variety of non-structural cosmetic and safety features of the automobile.

Topics include: interior and exterior trim, mirrors, weather stripping, stationary and non-stationary glass, interior com­ponents,fasteners, and safety procedures.

Hours: Class/Week:1
D.Lab/Week: 2.00
P.Lab/Week: 1.00
Pre-requisites:Program admission, ACR 100

ACR 109 DAMAGE IDENTIFICATION AND ASSESSMENT(3)

Introduces procedures and resources used in the identification and assessment of automotive collisions damages.

Topics include:assessment plan determination, dam­age analysis, collision estimation, service manual use, and computerized estimation.

Hours: Class/Week:2
D.Lab/Week: 2.00
Pre-requisites:Program admission, ACR 101, ACR 102, ACR 106, ACR 107, ACR 110, MAT 101

ACR 110 MINOR COLLISION REPAIR (2)

Introduces the materials and operations required to repair minor collision damage.

Topics include:pick, file, and finish procedures; body repair materials identification; body fillers usage; disc grinder procedures; safety procedures, and stud welders.

Hours: Class/Week:1
D.Lab/Week: 1.00
P.Lab/Week: 4.00
Pre-requisites:Program admission, ACR 100

ACR 120 CONVENTIONAL FRAME REPAIR (3)

Emphasizes the diagnosis, straightening, measurement, and alignment of conventional automobile and truck frames.

Topics include:alignment measurement systems; damage diagnosis; equipment types and usage; frame straightening, repair and align­ment; safety precautions, and computerized damage diagnosis.

Hours: Class/Week:1
D.Lab/Week: 2.00
P.Lab/Week: 3.00
Pre-requisites:ACR 109, SCT 100

ACR 121 UNIBODY IDENTIFICATION AND DAMAGE ANALYSIS(2)

Provides instruction in the identification and analysis of various forms of unibody damage.

Topics include:collapse or buckle damage identification, sag damage identification, sideways damage identification, twist damage identification, secondary damage identification, and lift equipment usage and safety.

Hours: Class/Week:1
D.Lab/Week: 2.00
P.Lab/Week: 2.00
Pre-requisites:ACR 109

ACR 122 UNIBODY MEASURING AND FIXTURING SYSTEMS (2)

Provides instruction in a variety of alignment measuring and fixturing systems.

Topics include:universal mechanical measuring system, universal laser measuring system, dedicated fixture system, upper body panel measurement, and English/metric tape alignment measurement.

Hours: Class/Week:1
D.Lab/Week: 1.00
P.Lab/Week: 3.00
Pre-requisites:ACR 121

ACR 123 UNIBODY STRAIGHTENING SYSTEMS AND TECHNIQUES (4)

Introduces unibody straightening systems and techniques used in automotive collision repair.

Topics include:equipment types and usage, safety procedures, primary/rough and secondary damage pull, single pull correction, multiple pull cor­rection, and impact or pull stress relief.

Hours: Class/Week:1
D.Lab/Week: 2.00
P.Lab/Week: 2.00
Pre-requisites:ACC 122, ACR 127

ACR 124 UNIBODY WELDING TECHNIQUES(2)

Provides instruction in specific welding applications in automotive collision repair.

Topics include:MIG welder panel welding, plug weld collision repair, butt weld collision repair, lap weld collision repair, safety procedures, resistance welding, aluminum MIG welding, and aluminum TIG welding.

Hours: Class/Week:0
D.Lab/Week: 2.00
P.Lab/Week: 3.00
Pre-requisites:ACR 122

ACR 125 UNIBODY STRUCTURAL PANEL REPAIR AND REPLACEMENT (3)

Provides instruction in attachment methods, proper repair and replacement of structural panels, dimensional control, areas of high stress concentration, sectional principles, and crush zones. Selection and preparation of recycled parts will be emphasized.

Topics include: primary structure, rear cross member, apron and rails, trans X member, rocker, w/s posts, hinge pillar, center pillar, floor pan, spot weld removal, panel sectional cuts, and damaged panel removal and replacement.

Hours: Class/Week:1
D.Lab/Week: 2.00
P.Lab/Week: 3.00
Pre-requisites:ACR 122, ACR 124

ACR 126 CONVENTIONAL BODY STRUCTURAL PANEL REPAIR (5)

Introduces conventional body structural panel repair. A variety of removal and replacement techniques is emphasized.

Topics include:partial or complete quarter panel removal and replacement, rocker panel removal and replacement, and center pillar post removal and replacement.

Hours: Class/Week:2
D.Lab/Week: 2.00
P.Lab/Week: 6.00
Pre-requisites:ACR 120

ACR 127 UNIBODY SUSPENSION AND STEERING SYSTEMS (2)

Provides instruction in unibody suspension and steering system damage analysis and repair.

Topics include:parallelogram suspension parts removal and replacement, rack and pinion steering system removal and replacement, damage analysis, quick check system damage determination, front end suspension equipment usage, and safety procedures.

Hours: Class/Week:2
D.Lab/Week: 1.00
P.Lab/Week: 2.00
Pre-requisites:ACR 122

ACR 128 BOLT-ON BODY PANEL REMOVAL AND REPLACEMENT(4)

Provides instruction in the removal and replacement of bolt on automobile body panels.

Topics include:hood, deck panels, and header panels removal and replacement; fender removal and installation/coining; door removal and installation; head­lamp and filler panels removal and replacement; grill removal and replacement; and headlamp adjustment.

Hours: Class/Week:2
D.Lab/Week: 2.00
P.Lab/Week: 3.00
Pre-requisites:Provisional admission

ACR 129 MAJOR COLLISION REPAIR INTERNSHIP/PRACTICUM (3)

Provides occupation-based learning opportunities for students pursuing the Major Collision Repair specialization. Students will be mentored by qualified professional technicians as they experience working in the Automotive Collision Repair profession in an industry standard commercial repair facility or industry standard simulated on­ campus facility.

Topics include:conventional frame repair, unibody damage identification and analysis, unibody measuring and fixturing systems, unibody straightening systems and techniques, unibody welding techniques, unibody structural panel repair and replacement, conventional body structural panel repair, unibody suspension and steering systems, and bolt-on body panel removal and replacement.

Hours: Class/Week:0
Lab/Week: 0
OBI/Week: 10
Pre-requisites:Completion of all required courses in the Major Collision Repair specialization

ACR 130 SANDING, PRIMING, AND PAINT PREPARATION (5)

Introduces the materials and procedures involved in preparing automobile bodies for refinishing.

Topics include:featheredging; masking procedures; safety procedures; surface preparation; corrosion preventative application; primers, sealers, and primer surfacer applications; and spraygun operation and maintenance.

Hours: Class/Week:2
D.Lab/Week: 4.00
P.Lab/Week: 3.00
Pre-requisites:Provisional admission, ACR 100

ACR 132 SPECIAL REFINISHING APPLICATION(5)

Provides instruction in the equipment, material, and techniques used in the application of special paints. Emphasis will be placed on automotive refinishing proce­dures.

Topics include:safety; paint identification; base metals preparation and priming; equipment use and maintenance; color application; original finish sealing; panel and spot repair and blending; thinners, reducers, and additives; and fiberglass, plastics, and rubber refinishing.

Hours: Class/Week:2
D.Lab/Week: 2.00
P.Lab/Week: 6.00
Pre-requisites:ACR 109, ACR 136

ACR 134 URETHANE ENAMELS REFINISHING APPLICATION(6)

Provides instruction in the equipment, material, and techniques used in the application of urethane enamels paint. Emphasis will be placed on automotive refinishing procedures.

Topics include:safety; paint identification; base metals preparation and priming; equipment use and maintenance; base coat/clear coat application; color application of solid and metallic finishes; original finish sealing; panel and spot repair and blending; thinners, reducers, and additives; and tri-coat finishing.

Hours: Class/Week:2
D.Lab/Week: 4.00
P.Lab/Week: 6.00
Pre-requisites:ACR 109
Co-requisites:ACR 136

ACR 135 TINT AND MATCH COLORS(6)

Introduces methods and techniques used in the process of color matching and production.

Topics include:tinting methods, gun techniques, variables adjustments, color flip-flop determination and correction, and reduction procedures.

Hours: Class/Week:2
D.Lab/Week: 8.00
Pre-requisites:Program admission

ACR 136 DETAILING(2)

Introduces the methods and techniques used in detailing a refinished automotive surface.

Topics include:finish analysis, color sanding, polishes and glazes, cleaning vehicle, and decal and stripes.

Hours: Class/Week:1
D.Lab/Week: 2.00
P.Lab/Week: 2.00
Pre-requisites:ACR 134

ACR 137 PAINT AND REFINISHING INTERNSHIP(3)

Provides occupation-based learning opportunities for students pursuing the Paint and Refinishing specialization. Students will be mentored by qualified professional technicians as they experience working in the Automotive Collision Repair profession in an industry standard commercial repair facility or industry standard simulated on­ campus facility.

Topics include:sanding, priming, and paint preparation; special refinishing applications; urethane enamels; tint and match colors; detailing; and employability skills.

Hours: Class/Week:0
Lab/Week: 0.00
OBI/Week: 10.00
Pre-requisites:Completion of all required courses in Paint and Refinish specialization.

ACT 100 REFRIGERATION FUNDAMENTALS (4)

Introduces basic concepts and theories of refrigeration.

Topics include: the laws of thermodynamics, pressure and temperature relationships, heat transfer, the refrigera­tion cycle, and safety.

Hours: Class/Week:3
D.Lab/Week: 2.00
Pre-requisites:Provisional admission

ACT 101 PRINCIPLES AND PRACTICES OF REFRIGERATION (7)

Introduces the use of refrigeration tools, materials, and procedures needed to install, repair, and service refrigeration systems.

Topics include:refrigeration tools; piping practices; service valves; leak testing; refrigerant recovery, recycling, and recla­mation; evacuation; charging; and safety.

Hours: Class/Week:5
D.Lab/Week: 2.00
P.Lab/O.B.I: 3.00
Pre-requisites:ACT 100

ACT 102 REFRIGERATION SYSTEMS COMPONENTS (7)

Provides the student with the skills and knowledge to install, test, and service major components of a refrigeration system.

Topics include:compressors, condensers, evaporators, metering devices, service procedures, refrigeration systems, and safety.

Hours: Class/Week:5
D.Lab/Week: 2.00
P.Lab/O.B.I: 3.00
Pre-requisites:ACT 100, ACT 101

ACT 103 ELECTRICAL FUNDAMENTALS (7)

Introduces fundamental electrical concepts and theories as applied to the air conditioning industry.

Topics include:AC and DC theory, electric meters, electric diagrams, distribution systems, electrical panels, voltage circuits, code requirements, and safety.

Hours: Class/Week:1
D.Lab/Week: 2.00
P.Lab/Week: 5.00
Pre-requisites:Provisional admission

ACT 104 ELECTRIC MOTORS (4)

Continues the development of skills and knowledge necessary for application and service of electric motors commonly used by the refrigeration and air conditioning industry.

Topics include:diagnostic techniques, capacitors, installation procedures, types of electric motors, electric motor service, and safety.

Hours: Class/Week:2
D.Lab/Week: 2.00
P.Lab/Week: 3.00
Pre-requisites:ACT 103

ACT 105 ELECTRICAL COMPONENTS (5)

Provides instruction in identifying, installing, and testing commonly used electrical components in an air conditioning system.

Topics include:pressure switches, overload devices, transformers, magnetic starters, other commonly used controls, diagnostic techniques, installation procedures, and safety.

Hours: Class/Week:3
D.Lab/Week: 2.00
P.Lab/Week: 3.00
Pre-requisites:ACT 103

ACT 106 ELECTRIC CONTROL SYSTEMS AND INSTALLATION (4)

Provides instruction on wiring various types of air conditioning systems.

Topics include:servicing procedures, solid state controls, system wiring, control circuits, and safety.

Hours: Class/Week:2
D.Lab/Week: 2.00
P.Lab/O.B.I: 3.00
Pre-requisites:ACT 105

ACT 107 AIR CONDITIONING PRINCIPLES (8)

Introduces fundamental theory and techniques needed to identify major compo­nents and functions of air conditioning systems. Instruction is given on types of air conditioning systems and use of instrumentation.

Topics include:types of AC systems, heat load calculation, properties of air, psychrometrics, duct design, air filtration, and safety principles.

Hours: Class/Week:6
D.Lab/Week: 4.00
Pre-requisites:ACT 102

ACT 108 AIR CONDITIONING SYSTEMS AND INSTALLATION (3)

Provides instruction on the installation and service of residential air conditioning systems.

Topics include:installation procedures, service, split-systems, add-on-systems, packaged systems, and safety.

Hours: Class/Week:2
P.Lab/O.B.I: 3.00
Pre-requisites:ACT 102, ACT 106

ACT 109 TROUBLESHOOTING AIR CONDITIONING SYSTEMS (7)

Provides instruction on troubleshooting and repair of major components of a residential air conditioning system.

Topics include:troubleshooting techniques, electrical controls, air flow, refrigeration cycle, and safety.

Hours: Class/Week:5
D.Lab/Week: 2.00
P.Lab/O.B.I: 3.00
Pre-requisites:ACT 108, ENG 100

ACT 110 GAS HEATING SYSTEMS (5)

Introduces principles of combustion and service requirements for gas heating systems.

Topics include:service procedures, electrical controls, piping, gas valves, venting, code requirements, principles of combustion, and safety.

Hours: Class/Week:2
D.Lab/Week: 2.00
P.Lab/Week: 6.00
Pre-requisites:ACT 106

ACT 111 HEAT PUMPS AND RELATED SYSTEMS (6)

Provides instruction on installation and servicing of electric heating systems, heat pumps, and related systems.

Topics include:installation procedures, servicing proce­dures, troubleshooting, valves, electrical components, safety, geothermal ground source energy supplies, and dual fuels.

Hours: Class/Week:3
D.Lab/Week: 4.00
P.Lab/O.B.I: 3.00
Pre-requisites:ACT 102, ACT 106

ACT 200 DESIGN AND APPLICATION OF LIGHT COMMERCIAL AIR CONDITIONING(4)

Continues in-depth instruction on components and functions of air conditioning systems with emphasis on design and application of light commercial air conditioning systems.

Topics include:refrigeration piping, hydronic piping, pump sizing, commercial load design, air flow, codes, and safety.

Hours: Class/Week:3
D.Lab/Week: 2.00
Pre-requisites:ACT 109, ACT 111

ACT 201 LIGHT COMMERCIAL AIR CONDITIONING CONTROL SYSTEMS (4)

Emphasizes the study of complex control systems on light commercial air conditioning systems.

Topics include:pneumatic controls, electronic controls, electrical con­trols, mechanical controls, and safety.

Hours: Class/Week:3
D.Lab/Week: 2.00
Pre-requisites:ACT 200

ACT 202 LIGHT COMMERCIAL AIR CONDITIONING SYSTEMS OPERATION (8)

Provides in-depth study of the operation of light commercial air conditioning systems.

Topics include:boiler operations, refrigeration components, energy manage­ment, codes, and safety.

Hours: Class/Week:6
D.Lab/Week: 4.00
Pre-requisites:ACT 200

ACT 203 LIGHT COMMERCIAL AIR CONDITIONING INTERNSHIP/PRACTICUM (12)

Provides students with occupation based instruction that applies learned skills to actual work experiences.

Topics include:application of commercial refrigeration knowledge and skills, appropriate employability skills, problem solving, adaptability to job equipment and technology, progressive productivity, and acceptable job performance. The Commercial Air Conditioning Internship/Practicum is implemented through student internship in an approved occupational setting or through student work in an occupational practicum. Written individualized training plans, written performance evaluations, and required integrative experiences are used to implement this course.

Hours: Class/Week:8
O.B.I/Week: 36
Pre-requisites:All non-elective courses required for program completion.

ACT 204 RESIDENTIAL SYSTEMS DESIGN (7)

Presents advanced refrigeration and electrical skills and theories.

Topics include:heat gain and heat loss, duct design, zone control, equipment selection, and safety.

Hours: Class/Week:4
D.Lab/Week: 6.00
Pre-requisites:ACT 109, ACT 111

ACT 205 GEORGIA STATE AND LOCAL RESIDENTIAL AIR CONDITIONING CODES (5)

Presents advanced level residential air conditioning code concepts and theories.

Topics include:local residential air conditioning codes, state residential air conditioning codes, gas piping, refrigeration piping, and safety.

Hours: Class/Week:5
Lab/Week: 0.00
Pre-requisites:ACT 203

ACT 206 AIR DISTRIBUTION SYSTEMS FOR RESIDENTIAL AIR CONDITIONING (5)

Continues development of air systems concepts, theories, and skills. Emphasis will be placed on test and balance techniques and fan laws.

Topics include:test and balance techniques, fan laws, and safety.

Hours: Class/Week:3
D.Lab/Week: 2.00
Pre-requisites:ACT 102, ACT 203, ACT 204

ACT 207 RESIDENTIAL AIR CONDITIONING INTERNSHIP/PRACTICUM (12)

Provides students with occupation based instruction that applies learned skills to actual work experiences.

Topics include:application of residential refrigeration knowledge and skills, appropriate employability skills, problem solving, adaptability to job equipment and technology, progressive productivity, and acceptable job performance. The Residential Air Conditioning Internship/Practicum is implemented through student internship in an approved occupational setting or through student work in an occupational practicum. Written individualized training plans, written performance evaluations, and required integrative experiences are used to implement this course.

Hours: Class/Week:0
O.B.I/Week: 36
Pre-requisites:All non-elective courses required for program completion.

ACT 208 COMMERCIAL REFRIGERATION DESIGN (4)

Provides an increased level of concepts and theory beyond ACT l02. Students are introduced to more design theory in commercial refrigeration.

Topics include:refrigeration heat calculation, equipment selection, refrigeration piping, codes, and safety.

Hours: Class/Week:3
D.Lab/Week: 2.00
Pre-requisites:ACT 109, ACT 112

ACT 209 COMMERCIAL REFRIGERATION APPLICATION (8)

Introduces the application of fundamental theories and concepts of refrigeration. Emphasis will be placed on equipment application and installation procedures.

Topics include:equipment application, installation procedures, cycle controls, energy man­agement, and safety.

Hours: Class/Week:4
D.Lab/Week: 8.00
Pre-requisites:ACT 206

ACT 210 TROUBLESHOOTING AND SERVICING COMMERCIAL REFRIGERATION (8)

Continues to provide experience in maintenance techniques in servicing light commercial refrigeration systems.

Topics include:system clearing, troubleshooting procedures, replacement of components, and safety.

Hours: Class/Week:4
D.Lab/Week: 8.00
Pre-requisites:ACT 206

ACT 211 COMMERCIAL REFRIGERATION INTERNSHIP/PRACTICUM (12)

Provides students with occupation based instruction that applies learned skills to actual work experiences. Internship will be emphasized to allow students opportunities to service heavy-duty refrigeration equipment in commercial settings.

Topics include:application of commercial refrigeration knowledge and skills, appropriate employability skills, problem solving, adaptability to job equipment and technology, progressive productivity, and acceptable job performance. The Commercial Refrigera­tion Internship/Practicum is implemented through student internship in an approved occupational setting or through student work in an occupational practicum. Written individualized training plans, written performance evaluations, and required integrative experiences are used to implement this course.

Hours: Class/Week:0
O.B.I.Lab/Week: 36
Pre-requisites:All non-elective courses required for program completion.


AHS 100 ANATOMY AND PHYSIOLOGY (5)
Focuses on basic normal structure and function of the human body.

Topics include:medical terms describing the human body, and structure and function of the human body.
Hours: Class/Week -5
Lab/Week: 0.00
Pre-requisites:Program admission

AHS 102 DRUG CALCULATION AND ADMINISTRATION (3)
Uses basic mathematical concepts and includes basic drug administration. Emphasizes critical thinking skills.

Topics include:systems of measurement, calculating drug problems, resource materials usage, basic pharmacology, administering medications in a simulated clinical environment, principles of IV therapy techniques, and client education.
Hours: Class/Week -2
D.Lab/Week: 2.00
Pre-requisites:MAT 101

AHS 103 NUTRITION AND DIET THERAPY (5)
Presents a study of the nutritional needs of the individual.

Topics include:nutrients, standard and modified diets, nutrition throughout the lifespan, and client education.
Hours: Class/Week -2
Lab/Week: 0.00
Pre-requisites:Provisional admission

AHS 104 INTRODUCTION TO HEALTH CARE (3)
Introduces a grouping of fundamental principles, practices, and issues common to many specializations in the health care profession. In addition to the essential skills, students explore various delivery systems and related issues.

Topics include:basic life support/CPR, basic emergency care/first aid and triage, vital signs, infection control, and blood/air-borne pathogens.
Hours: Class/Week -2
P.Lab/Week: 3.00
Pre-requisites:Provisional admission

AHS 105 BASIC INORGANIC CHEMISTRY (5)
Introduces chemical concept principles, laws, and techniques applicable to the medical laboratory.

Topics include:laboratory safety, fundamental principles of chemistry, weight and measures, solutions, and basic laws of chemistry.
Hours: Class/Week -3
D.Lab/Week: 2.00
Pre-requisites:MAT 101

AHS 109 MEDICAL TERMINOLOGY FOR ALLIED HEALTH SCIENCES (3)
Introduces the elements of medical terminology. Emphasis is placed on building familiarity with medical words through knowledge of roots, prefixes, and suffixes.

Topics include:origins (roots, prefixes, and suffixes), word building, abbreviations and symbols, terminology related to the human anatomy, reading medical orders and reports, and terminology specific to the student’s field of study.
Hours: Class/Week -3
Lab/Week: 0.00
Pre-requisites:Provisional admission

AHS 151 INTRODUCTION TO MEDICAL TERMINOLOGY (3)
Provides knowledge of the correct use, meaning and derivatives of medical terms through lectures and multi-media instruction. Proper spelling and pronunciation are also emphasized with these terms.

Topics include:
Hours: Class/Week -3
D.Lab/Week: 0.00
P.Lab/O.B.I: 0.00
Pre-requisites:


AMF 152 MANUFACTURING ORGANIZATION PRINCIPLES (2)
This course provides learners with an overview of the functional and structural composition of organizations.

Topics include:supply and demand, product flow, types of manufacturing process, structure of manufacturing organizations, manufacturing business principles, employee impact on the bottom line, and workplace ethics.
Hours: Class/Week -2
Lab/Week: 0.00

AMF 154 MANUFACTURING WORKPLACE SKILLS (2)
This course provides the personal and interpersonal effectiveness skills required to succeed in the manufacturing environment.

Topics include:listening, communication, team skills, personal wellness, managing change, and creating a positive image.
Hours: Class/Week -2
Lab/Week: 0.00

AMF 156 MANUFACTURING PRODUCTION REQUIREMENTS (2)
This course provides learners with the knowledge and skills associated with quality and productivity in the manufacturing environment.

Topics include:
Hours: Class/Week -2
Lab/Week: 0.00

AMF 158 AUTOMATED MANUFACTURING SKILLS (3)
This course provides learners with an introduction into computerized process control and the operational requirements associated with automated machines in the manufacturing environment.

Topics include:
Hours: Class/Week -3
Lab/Week: 0.00

AMF 160 REPRESENTATIVE MANUFACTURING SKILLS (6)
This course provides learners with an introduction to representative manufacturing skills and associated safety requirements.

Topics include:plant safety, materials movement equipment, precision measurements for manufacturing, and blueprint reading.
Hours: Class/Week -6
Lab/Week: 0.00

AMT 100 AVIATION MATHEMATICS (3)

Aviation mathematics provides students with the knowledge necessary to use and apply mathematical procedures and processes that are applicable to aviation maintenance functions.

Topics include:perform algebraic operations; extract roots and raise numbers to a given power; determine area and volume of geometrical shapes; and solve ratio, proportion, and percentage problems.Minimum Federal Aviation Agency teaching level-3.

Hours: Class/Week:3
Lab/Week: 0.00
Pre-requisites:Provisional admission

AMT 101 AIRCRAFT MAINTENANCE REGULATIONS (3)

This course provides students with the knowledge and skills necessary to select and use FAA and manufacturers’ specifications, data sheets, manuals, related regulations, and technical data; to write descriptions of aircraft conditions, record work performed, and complete maintenance forms and inspection reports; and learn to interpret federal regulations regarding mechanic privileges and limitations.

Topics include:maintenance publications, maintenance forms and records, and mechanic privileges and limitations.

Hours: Class/Week:2
P.Lab/Week: 3.00
Pre-requisites:SCT 100

AMT 102 AIRCRAFT APPLIED SCIENCES (13)

Provides students with the fundamentals of aircraft servicing methods and ground operations.

Topics include:aircraft drawings, aircraft weight and balance, fluid lines and fittings, materials and processes, ground operations and servicing, and aircraft cleaning and corrosion control.

Hours: Class/Week:10
P.Lab/Week: 10.00
Co-requisites:AMT 100(Diploma), or MAT 191 (Degree)

AMT 103 AIRCRAFT ELECTRICITY AND ELECTRONICS (7)

Basic electricity and electronics provides a study of the relationships of voltage, current, and resistance in aircraft electrical systems, and the use of meters. Alternators; generators; starters; motors; charging systems; basic AC and DC systems; and semi-con­ductor, solid state, and integrated circuit fundamentals are introduced.

Topics include:basic electricity; determine the relationship of voltage, current, and resistance in electri­cal circuits; read and interpret electrical circuit diagrams; measure voltage, current, resistance, and continuity; calculate and measure electrical power; calculate and measure capacitance and inductance; inspect and service batteries; and solid state devices applications.

Hours: Class/Week:5
D.Lab/Week: 5.00
Pre-requisites:AMT 100

AMT 121 AVIATION PHYSICS (3)

Provides students with an introduction to the theory and application of physics to aerospace vehicles and their subsystems.

Topics include: temperature and heat; pres­sure, temperature, and volume of air mass; basic aerodynamics and theory of flight; physical factors affecting engine output; relationship of pressure, area, and force; ori­gin of sound; principles of simple machines; and centrifugal and centripetal force.

Hours: Class/Week:3
Lab/Week: 0.00
Pre-requisites:Provisional admission

AMT 201 AIRCRAFT AIRFRAME STRUCTURES(3)

This course presents a survey of aircraft airframe structures used in aircraft.

Topics include:wood structures, aircraft covering, and aircraft finishes.

Hours: Class/Week:2
P.Lab/Week: 3.00
Pre-requisites:Provisional admission

AMT 202 AIRFRAME SHEET METAL AND NON-METALLIC STRUCTURES (7)

Provides a study of metal and non-metallic tube and riveted sheet monocoque or semi-monocoque.

Topics include:sheet metal structures introduction; install conven­tional rivets; install special rivets and fasteners; sheet metal form, lay out, and bend; inspect and repair sheet metal structures; identify non-metallic structures; inspect bonded structures; fiberglass structures; plastic structures; composite and honeycomb structures; inspect, check, service, and repair windows, doors, and interior furnish­ings; and laminated structures.Minimum Federal Aviation Agency teaching levels-2, 3.

Hours: Class/Week:5
P.Lab/Week: 7.00
Pre-requisites:Provisional admission

AMT 203 AIRFRAME WELDING (2)

Provides a study of airframe non-metallic structures and allied maintenance procedures.

Topics include:welding principles; soldering, brazing, gas-welding, and arc­welding steel; welding aluminum and stainless steel; fabricating tubular structures; soldering stainless steel; and welding titanium and magnesium.

Hours: Class/Week:1
P.Lab/Week: 3.00
Pre-requisites:Provisional admission

AMT 204 AIRFRAME ASSEMBLY AND RIGGING (3)

This course provides a study of aircraft assembly and rigging configurations.

Topics include:use assembly and rigging hand tools and equipment; rig fixed wing air­craft; rig rotary wing aircraft; check alignment of structures; assemble aircraft components, including flight control surfaces; balance, rig, and inspect movable primary and secondary control surfaces; and jack aircraft.

Hours: Class/Week:2
P.Lab/Week: 3.00
Pre-requisites:Program admission

AMT 205 AIRFRAME INSPECTIONS(5)

This course provides for performing airframe inspections with emphasis on developing the skills related to conformity and airworthiness evaluations.

Topics include:perform airframe conformity inspection, and perform airframe airworthiness inspection. Minimum Federal Aviation Agency teaching levels-3.

Hours: Class/Week:3
P.Lab/Week: 7.00
Pre-requisites:AMT 204

AMT 206 AIRCRAFT HYDRAULIC AND PNEUMATIC SYSTEMS(3)

This course provides a study of the principles of generation, distribution, and management of hydraulic and pneumatic power throughout the aircraft.

Topics include:identify hydraulic fluids; repair hydraulic and pneumatic power system components; inspect, check, service, troubleshoot, and repair hydraulic and pneumatic power sys­tems; hydraulic and pneumatic position and warning systems; and inspect, check, troubleshoot, service, and repair aircraft position and warning systems. Minimum Federal Aviation Agency teaching levels-2, 3.

Hours: Class/Week:2
P.Lab/Week: 3.00
Pre-requisites:AMT 103

AMT 207 AIRCRAFT LANDING GEAR SYSTEMS (4)

This course provides a study of aircraft landing gear systems with emphasis on inspection and maintenance procedures of hydraulic and pneumatic power throughout the aircraft structure.

Topics include:inspect, check, service, and repair landing gear retraction systems and shock struts; inspect, check, service, and repair brakes, wheels, and tires; and inspect, check, service, and repair steering systems.

Hours: Class/Week:3
P.Lab/Week: 5.00
Pre-requisites:Program admission

AMT 208 AIRFRAME SYSTEMS (10)

This course provides a study of aircraft environmental control systems.

Topics include:inspect, check, troubleshoot, service, and repair cabin atmosphere control sys­tems; inspect, check, troubleshoot, service, and repair ice and rain control systems; inspect, check, troubleshoot, service, and repair fire protection systems; inspect, check, troubleshoot, service, and repair aircraft fuel systems; and inspect, check, trou­bleshoot, service, and repair aircraft instrument systems. Minimum Federal Aviation Agency teaching levels-1,2,3.

Hours: Class/Week:8
P.Lab/Week: 7.00
Pre-requisites:Program admission

AMT 209 AIRCRAFT ELECTRICAL, COMMUNICATION, AND NAVIGATION SYSTEMS (9)

This course provides a study of aircraft electrical, communication, and navigation systems.

Topics include:install, check, and service airframe electrical wiring, controls, switches, indicators, and protective devices; inspect, check, troubleshoot, service, and repair alternating and direct current electrical systems; repair and inspect aircraft elec­trical system components, crimp and splice wiring to manufacturer’s specifications, and repair pins and sockets of aircraft connectors; inspect, check, and troubleshoot autopilot servos and approach coupling systems; inspect, check, and service aircraft electronic communication and navigation systems including VHF passenger address inter­phones and static discharge devices, aircraft VOR, ILS LORAN, radar beacon transponders, flight management computers, and GPWS; inspect and repair antenna and electronic equipment installations; and inspect,check, and troubleshoot constant speed and integrated speed drive generators. Minimum Federal Aviation Agency teaching levels-1, 2, 3.

Hours: Class/Week:7
D.Lab/Week: 2.00
P.Lab/Week: 8.00
Pre-requisites:Provisional admission

AMT 221 RECIPROCATING ENGINE POWERPLANTS I (5)

This course provides a study of piston engine theory and maintenance including and water cooled aircraft engines.

Topics include:aircraft reciprocating engine theory, and inspect and repair radial engines.

Hours: Class/Week:5
Lab/Week: 0.00
Pre-requisites:Program admission

AMT 222 RECIPROCATING ENGINE POWERPLANTS II (7)

This course continues a study of piston engine theory and maintenance including air and water cooled aircraft engines.

Topics include:overhaul a reciprocating styleengine; inspect, check, service, and repair reciprocating engines and engine installations; install, troubleshoot, and remove reciprocating engines; inspect and maintain aircraft engine lubrication systems; inspect and maintain aircraft engine induction systems; inspect and maintain aircraft engine cooling systems; and inspect and maintain aircraft engine exhaust systems.Minimum Federal Aviation teaching levels – 1, 2, 3.

Hours: Class/Week:3
P.Lab/Week: 12.00
Pre-requisites:AMT 221, AMT 226

AMT 223 GAS TURBINE POWERPLANTS I (5)

This course provides a study of the fundamentals and evolution of the jet engine and jet propulsion.

Topics include: aircraft gas turbine engine theory, and inspect and troubleshoot unducted fan systems and components.

Hours: Class/Week:5
Lab/Week: 0.00
Pre-requisites:Program admission

AMT 224 GAS TURBINE POWERPLANTS II (5)

This course continues a study of the fundamentals and evolution of the jet engine and jet propulsion.

Topics include: troubleshoot, and remove turbine engines; and inspect, check, service, and repair turbine engines and turbine aircraft engine lubrication systems, inspect and maintain aircraft engine inductions systems; inspect and maintain aircraft engine exhaust systems.Minimum Federal Aviation Agency teaching levels – 1, 2.

Hours: Class/Week:3
P.Lab/O.B.I: 7.00
Pre-requisites:AMT 223, AMT 226

AMT 225 AIRCRAFT ENGINE INSPECTION (2)

This course provides students with the knowledge and skills to perform aircraft engine inspections.

Topics include:perform an aircraft powerplant conformity and air­worthiness inspection.

Hours: Class/Week:2
P.Lab/Week: 1.00
Pre-requisites:AMT 222 or AMT 224

AMT 226 AIRCRAFT ENGINE FUEL AND FUEL METERING SYSTEMS (7)

This course provides a study of aircraft engine fuel and fuel metering systems.

Topics include:repair engine fuel system components; inspect, check, service, troubleshoot, and repair engine fuel systems; troubleshoot and adjust turbine engine fuel metering systems and electronic engine fuel controls; inspect, check, service, troubleshoot, and repair reciprocating and turbine engine fuel metering systems; overhaul carburetors; repair engine fuel metering system components; and inspect, check, and service water injection systems.

Hours: Class/Week:5
P.Lab/Week: 7.00
Pre-requisites:AMT 221, AMT 223

AMT 227 AIRCRAFT ENGINE ELECTRICAL, IGNITION, AND STARTING SYSTEMS (10)

This course provides a study of aircraft engine electrical systems.

Topics include:troubleshoot, service, and repair electrical and mechanical fluid rate-of-flow indicating systems; inspect, check, service, troubleshoot, and repair electrical and mechanical engine temperature, pressure, and r.p.m. indicating systems; inspect, check, service, troubleshoot, and repair engine fire detection and extinguishing systems; install, check, and service engine electrical wiring, controls, switches, indicators, and protec­tive devices; repair engine electrical system components; overhaul magneto and igni­tion harness; inspect, service, troubleshoot, and repair reciprocating and turbine engine ignition systems and components; inspect, service, troubleshoot, and repair turbine engine electrical starting systems; and inspect, service, and troubleshoot turbine engine pneumatic starting systems.

Hours: Class/Week:8
P.Lab/Week: 7.00
Pre-requisites:AMT 103

AMT 228 AIRCRAFT PROPELLER SYSTEMS (9)

This course provides a study of aircraft propeller systems.

Topics include:propeller theory and fundamentals; inspect and maintain propellers; and inspect, troubleshoot, and remove propellers. Minimum Federal Avaition Agency Teaching levels – 1, 2, 3.

Hours: Class/Week:7
P.Lab/O.B.I: 8.00
Pre-requisites:AMT 221, AMT 223

AUT 120 INTRODUCTION TO AUTOMOTIVE TECHNOLOGY (3)

Introduces basic concepts and practices necessary for safe and effective automotive shop operation.

Topics include:safety procedures; legal/ethical responsibilities; measurement; machining; hand tools; shop organization, management and work flow systems.

Hours: Class/Week:2
P.Lab/Week: 3.00
Pre-requisites:Provisional admission

AUT 122 ELECTRICAL AND ELECTRONIC SYSTEMS (6)

Introduces automotive electricity.

Topics include:general electrical system diagnosis; lighting system diagnosis and repair; guages, warning devices, and driver information system diagnosis and repair; horn and wiper/washer diagnosis and repair; accessories diagnosis and repair.

Hours: Class/Week:4
P.Lab/Week: 6.00
Pre-requisites:AUT 120

AUT 124 BATTERY,STARTING AND CHARGING SYSTEMS (4)

Emphasizes the basic principles, diagnosis, and service/repair of batteries, starting systems, starting system components, alternators, and regulators.

Topics include:battery diagnosis and service; starting system diagnosis and repair; charging system diagnosis and repair.

Hours: Class/Week:2
P.Lab/Week: 6.00
Pre-requisites:AUT 122

AUT 126 ENGINE PRINCIPLES OF OPERATION AND REPAIR(6)

Introduces automotive engine theory and repair, placing emphasis on inspection, testing, and diagnostic techniques.

Topics include:general diagnosis; removal and reinstallation; cylinder heads and valve trains diagnosis and repair, engine blocks assembly diagnosis and repair; lubrication and cooling systems diagnosis and repair.

Hours: Class/Week:3
P.Lab/Week: 9.00
Pre-requisites:AUT 120

AUT 128 FUEL, IGNITION, AND EMISSION SYSTEMS (7)

Introduces fuel, ignition, and exhaust systems theory, diagnosis, repair, and service for vehicles with carburetion and fuel injection systems.

Topics include:general engine diagnosis; ignition system diagnosis and repair; fuel, air induction, and exhaust systems diagnosis and repair; positive crankcase ventilation; exhaust gas recirculation; engine related service.

Hours: Class/Week:5
P.Lab/Week: 6.00
Pre-requisites:AUT 122, AUT 124, and AUT 126

AUT 130 AUTOMOTIVE BRAKE SYSTEMS (4)

Introduces Brake systems theory and its application to automotive systems.

Topics include:hydraulic system diagnosis and repair; drum brake diagnosis and repair; disc brake diagnosis and repair; power assist units diagnosis and repair; miscellaneous (wheel bearings,parking brakes, electrical, etc.) diagnosis and repair.

Hours: Class/Week:3
P.Lab/Week: 3.00
Pre-requisites:AUT 122

AUT 132 SUSPENSION AND STEERING SYSTEMS (4)

Introduces students to principles of steering, suspension, wheel alignment, electronic steering, and electronic active suspension.

Topics include:steering systems diagnosis and repair; suspension systems diagnosis and repair; wheel alignment diagnosis, adjustment and repair; wheel and tire diagnosis and repair.

Hours: Class/Week:3
P.Lab/Week: 3.00
Pre-requisites:AUT 122

AUT 134 DRIVELINES (3)

Introduces basics of rear-wheel drive, front-wheel drive, and four-wheel drive driveline related operation, diagnosis, service and related electronic controls.

Topics include:drive shaft and half shaft, universal and constant-velocity (cv) joint diagnosis and repair; ring and pinion gears and differential case assembly; limited slip differential; drive axle shaft; four-wheel drive/all-wheel drive component diagnosis and repair.

Hours: Class/Week:2
P.Lab/Week: 6.00
Pre-requisites:AUT 122

AUT 138 MANUAL TRANSMISSION/TRANSAXLE (4)

Introduces basics of front and rear-wheel drive. Clutch operation, diagnosis and service is included. Electronic controls related to transmission/transaxle operation are discussed.

Topics include:clutch diagnosis and repair, transmission/transaxle diagnosis and repair.

Hours: Class/Week:3
P.Lab/Week: 3.00
Pre-requisites:AUT 122

AUT 140 ELECTRONIC ENGINE CONTROL SYSTEMS (7)

Introduces concept of electronic engine control.

Topics include:computerized engine controls diagnosis and repair; intake air temperature controls; early fuel evap­oration (intake manifold temperature) controls; evaporative emissions controls.

Hours: Class/Week:6
P.Lab/Week: 3.00
Pre-requisites:AUT 128

AUT 142 CLIMATE CONTROL SYSTEMS (6)

Introduces the theory and operation of automotive heating and air conditioning systems. Students attain proficiency in inspection, testing, service, and repair of heating and air conditioning systems and related components.

Topics include:a/c system diag­nosis and repair; refrigeration system component diagnosis and repair; heating, ventilation, and engine cooling systems diagnosis and repair; operating systems and related controls diagnosis and repair; refrigerant recovery, recycling, and handling.

Hours: Class/Week:5
P.Lab/Week: 3.00
Pre-requisites:AUT 122

AUT 144 INTRODUCTION TO AUTOMATIC TRANSMISSIONS (4)

Introduces students to basic transmission/transaxle theory, inspection, and service procedures. Focuses on minor in-car adjustments, replacements, and repair.

Topics include:general transmission and transaxle diagnosis; transmission and transaxle maintenance and adjustment; in-vehicle transmission and transaxle repair.

Hours: Class/Week:3
P.Lab/Week: 3.00
Pre-requisites:AUT 122

AUT 210 AUTOMATIC TRANSMISSION REPAIR (7)

Introduces automatic transmission hydraulic/mechanical operations, transmission repair, and automatic transmission hydraulic/mechanical diagnosis.

Topics include:removal, disassembly, and reinstallation; oil pump and converter; gear train, shafts, bushings and case; friction and reaction units.

Hours: Class/Week:5
P.Lab/Week: 6.00
Pre-requisites:AUT 144

AUT 212 ADVANCED ELECTRONIC TRANSMISSION DIAGNOSIS (3)

Introduces automatic transmission hydraulic/mechanical and electronic diagnosis and repair.

Topics include:electronically controlled automatic transmission, automatic transmission electrical and electronic problem diagnosis and repair.

Hours: Class/Week:2
P.Lab/Week: 3.00
Pre-requisites:AUT 210

AUT 214 ADVANCED ELECTRONIC CONTROLLED BRAKE SYSTEM DIAGNOSIS (4)

Introduces anti-lock Brake system (ABS) to include ABS components and ABS operation, testing, and diagnosis.

Topics include:general Brake and anti-lock Brake sys­tems diagnosis and testing, light truck rear anti-lock Brake system, four-wheel anti­lock Brake system locations, components, and operation.

Hours: Class/Week:3
P.Lab/Week: 3.00
Pre-requisites:AUT 130

AUT 216 ADVANCED ELECTRONIC CONTROLLED SUSPENSION AND STEERING SYSTEMS (4)

Introduces principles of electronic suspension, electronic steering, and electronic active suspension.

Topics include:electronic steering systems diagnosis and adjustment /repair, and diagnosis of electrical and electronic controlled steering and suspension systems.

Hours: Class/Week:3
P.Lab/Week: 3.00
Pre-requisites:AUT 132

AUT 218 ADVANCED ELECTRONIC ENGINE CONTROL SYSTEMS (4)

Introduces On-Board Diagnostics II (OBD II), California Air Research Board (CARB) requirements and monitoring technology, diagnostic trouble code definitions, and essentials of advanced driveability diagnosis and data interpretation using a scanner.

Topics include:OBD II standards; monitoring capabilities; OBD II diagnostics; OBD II terms.

Hours: Class/Week:3
P.Lab/Week: 3.00
Pre-requisites:AUT 140

AUT 220 AUTOMOTIVE TECHNOLOGY INTERNSHIP (6)

Provides student work experience in the occupational environment.

Topics include:application of automotive technology knowledge and skills, appropriate employability skills, problem solving, adaptability to job setting, progressive productivity, and acceptable job performance.

Hours: Class/Week:0
P.Lab/Week: 18.00
Pre-requisites:Provisional admission


AVT 101 BASIC ELECTRONICS (6)

Provides a review of the basic theory and application of electronics with a primary focus on use in avionic systems.

Topics include:atomic theory, DC circuits, AC circuits, alternating current, inductance and transformers, capacitance, resonance and filters, vacuum tubes, and solid state devices.

Hours: Class/Week:4
D.Lab/Week: 2.00
P.Lab/Week: 3.00
Pre-requisites:MAT 103)diploma), or MAT 191(degree)
Co-requisites:MAT 105(diploma) or MAT 193(degree)

AVT 102 AVIONICS MAINTENANCE PRACTICES (5)

Provides practical experience in maintaining avionics systems.

Topics include:solder/solderless connecting, use of test instruments, component installation/removal techniques, repair procedures, and troubleshooting techniques.

Hours: Class/Week:3
P.Lab/Week: 6.00
Pre-requisites:AVt 101

AVT 103 ADVANCED ELECTRONICS (6)

Introduces the theory and application of radio frequency transmission and reception.

Topics include:power supplies, measuring devices, oscillators, amplifiers, trans­mitters, amplitude modulation, AM receivers, frequency modulation, and antenna systems.

Hours: Class/Week:4
D.Lab/Week: 2.00
P.Lab/Week: 3.00
Pre-requisites:AVT 101

AVT 104 DIGITIAL ELECTRONICS (6)

Introduces the theory and application of microprocessors with a primary focus on their use in avionic systems.

Topics include:numbering system, logic gates, Boolean algebra, flip-flops, and registers and counters.

Hours: Class/Week:4
D.Lab/Week: 2.00
P.Lab/Week: 3.00
Pre-requisites:AVT 101

AVT 106 AIRCRAFT LOGIC SYSTEMS(6)

Focuses on microprocessor based computers used in avionics systems.

Topics include:memory, mass storage, computer systems, data bases, and logic systems repair procedures.

Hours: Class/Week:4
D.Lab/Week: 2.00
P.Lab/Week: 3.00
Co-requisites:AVT 104

AVT 107 AIRCRAFT COMMUNICATION SYSTEMS (7)

Continues the study of avionics maintenance practices with emphasis on aircraft­communication systems.

Topics include:component operation, component location, integration, analysis, maintenance, and ACARS.

Hours: Class/Week:5
D.Lab/Week: 2.00
P.Lab/Week: 3.00
Co-requisites:AVT 104

AVT 108 NAVIGATION SYSTEMS (7)

Continues the study of avionics maintenance practices with emphasis on aircraft navigational systems.

Topics include:bridges and monitors, synchros, gyros, and nav­igation systems.

Hours: Class/Week:5
D.Lab/Week: 2.00
P.Lab/Week: 3.00
Co-requisites:AVT 104

AVT 109 FLIGHT DIRECTOR AND AUTOPILOT SYSTEMS (7)

Continues the study of avionics maintenance practices with emphasis on flight director and autopilot systems.

Topics include:flight director systems, autopilot sys­tems, and avionics line maintenance test equipment.

Hours: Class/Week:5
D.Lab/Week: 2.00
P.Lab/Week: 3.00
Co-requisites:AVT 108