CNA 100 PATIENT CARE FUNDAMENTALS (8)
Introduces student to the occupation of Certified Nurse Assistant. Emphasis is placed on human anatomy and physiology, cardiac pulmonary resuscitation, and nutrition and diet therapy.

Topics include:role and responsibilities of the Certified Nurse Assistant; topography, structure, and function of body systems; legal and safety requirements in the patient care field; equipment use and care; and performance skills standards and procedures.
Hours: Class/Week -5
D.Lab/Week: 6.00
P.Lab/Week: 0.00
Pre/Co-requisites:None

CAR 101 SAFE USE OF HAND AND POWER TOOLS (3)
Provides instruction in the use of hand and power tools. Emphasis will be placed on the safe use of each tool covered.

Topics include:layout and measuring tools, cutting tools, drilling and boring tools, and finishing and fastening tools.
Hours: Class/Week -2
D.Lab/Week: 1.00
P.Lab/Week: 3.00
Pre-requisites:Provisional admission

CAR 103 MATERIALS (3)
Introduces the fundamental array of building materials used in residential and commercial construction.

Topics include:fasteners, wood products, finishing materials, and manufactured products.
Hours: Class/Week -3
Lab/Week: 0.00
Pre-requisites:Provisional admission

CAR 105 PRINT READING (5)
Introduces the reading and interpretation of prints and architectural drawings.

Topics include:types of plans, scales, specifications, conventions, and schedules.
Hours: Class/Week -5
Lab/Week: 0.00
Pre-requisites:MAT 101

CAR 107 SITE LAYOUTS, FOOTINGS, AND FOUNDTATIONS (5)
Introduces the concepts and practices of basic site layout, footings, and foundation construction. Students will use layout equipment for on-site laboratory practice.

Topics include:zoning restrictions and codes, batter boards installation, builder’s levels, squaring methods, footings, plot plan interpretation, materials estimation, foundation types, foundation forms, edge forms, waterproofing, and soil testing and excavation.
Hours: Class/Week -4
P.Lab/Week: 3.00
Pre-requisites:CAR 105

CAR 110 FLOOR FRAMING (3)
Introduces materials identification, materials estimation, and installation procedures of floor and sill framing members. On-site construction procedures will be emphasized.

Topics include:size selection of girders and joists, materials estimation, and layout and installation procedures.
Hours: Class/Week -2
P.Lab/Week: 3.00
Pre-requisites:CAR 101, CAR 103, CAR 105

CAR 111 WALL FRAMING (3)
Provides instruction in identification, materials estimation, and framing production of wall and partition members. Emphasis will be placed on practical application of competencies.

Topics include:estimation and computation procedures, rough opening layouts, construction and erection of wall members, and sheathing installation.
Hours: Class/Week -2
P.Lab/Week: 3.00
Pre-requisites:CAR 101, CAR 103, CAR 105

CAR 112 CEILING AND ROOF FRAMING (6)
Introduces terminology, concepts, and procedures used in identification, estimation, layout, and installation of ceiling and roof framing systems.

Topics include:identification of ceiling systems, ceiling system materials estimation, ceiling system layout procedures, scaffolding and ladder safety, ceiling system installation procedures, roof system terminology, roof system estimation and layout, roof system installation and decking, and vent systems.
Hours: Class/Week -4
P.Lab/Week: 6.00
Pre-requisites:CAR 101, CAR 103, CAR 105

CAR 114 ROOF COVERINGS (2)
Introduces identification, estimation, and installation of roof covering materials.

Topics include: materials identification, estimation, layout procedures, installation, and safety precautions.
Hours: Class/Week -1
D.Lab/Week: 4.00
Pre-requisites:CAR 101, CAR 103, CAR 105

CAR 115 EXTERIOR FINISHES AND TRIM (5)
Introduces materials identification, estimation, and installation procedures for exterior finish and trim materials to include window and door units. Emphasis will be placed on competency development through laboratory practice.

Topics include:doors and windows, siding types, materials identification, materials estimation, and instal¬lation procedures.
Hours: Class/Week -2
D.Lab/Week: 2.00
P.Lab/Week: 6.00
Pre-requisites:CAR 101, CAR 103, CAR 105

CAR 117 INTERIOR FINISHES I (4)
Introduces procedures for identification, estimation, and installation of interior trim.

Topics include: insulation materials identification, insulation materials estima¬tion, insulation application methods, thermal and sound control, wall and ceiling materials identification, paneling installation, and acoustical ceiling tile.
Hours: Class/Week -1
D.Lab/Week: 9.00
Pre-requisites:CAR 101, CAR 103, CAR 105

CAR 118 INTERIOR FINISHES II (4)
Introduces procedures for identification, estimation, and installation of interior trim. The course also introduces various interior door units, door locks and trim, and installation procedures and describes the selection, estimation, and installation of various wall coverings including paint and wallpaper.

Topics include:trim terminology, materials identification, materials estimation, installation procedures, door frame installation, door hanging procedures, split jamb prehung unit installation, solid jamb prehung unit installation, and wall coverings.
Hours: Class/Week -1
P.Lab/Week: 9.00
Pre-requisites:CAR 101, CAR 103, CAR 105

CAR 119 INTERIOR FINISHES III (3)
Introduces finish floor coverings for residential construction projects. Emphasis will be placed on identification, estimation, and installation of various types of hard and soft floor coverings. This course introduces design, construction, and installation of fireplace trim. The course also introduces locating and installing cabinets and millwork.

Topics include: identification of flooring materials, flooring estimation proce¬dures, flooring installation procedures, fireplace trim, cabinets and millwork.
Hours: Class/Week -1
P.Lab/Week: 9.00
Pre-requisites:CAR 101, CAR 103, CAR 105

CAR 121 CORNICE AND SOFFIT (1)
Provides instruction in the production and installation of various types and styles of cornice and soffit work used in residential carpentry.

Topics include:identification of types and styles, vent systems, materials estimation, installation procedures, and ladder and scaffolding safety.
Hours: Class/Week -1
P.Lab/Week: 2.00
Pre-requisites:CAR 101, CAR 103, CAR 105, Program admission

CAR 125 INTERIOR DOORS (2)
Introduces various interior door units, door locks and trim, and installation procedures.

Topics include:door frame installation, door hanging procedures, trim installa¬tion, split jamb prehung unit installation, and solid jamb prehung unit installation.
Hours: Class/Week -1
D.Lab/Week: 4.00
Pre-requisites:CAR 101, CAR 103, CAR 105, Program admission

CAR 126 STAIRS (3)
Provides fundamental instruction in the layout, construction, and installation of various stair types.

Topics include:identification of stair types, identification of stair components, riser and tread calculation, stringer layout, and fabrication and installa¬tion procedures.
Hours: Class/Week -2
P.Lab/Week: 3.00
Pre-requisites:CAR 101, CAR 103, CAR 105, Program admission

CAR 127 RESIDENTIAL CARPENTRY INTERNSHIP (4)
Provides students with occupation-based instruction that applies learned skills to actual work experience. Emphasizes students opportunities to practice finish work as learned in class and lab as part of the residential carpentry specialization courses.

Topics include:application of residential carpentry skills, appropriate employability skills, problem solving, adaptability to job equipment and technology, progressive productivity, and acceptable job performance.
Hours: Class/Week -0
O.B.I/Week: 12.00
Pre-requisites:All non-elective courses required for completion of Residential Carpentry Specialization

CAR 130 DOORS AND DOOR HARDWARE (2)
Provides instruction in the identification and installation of a variety of doors, frames, and door hardware for commercial construction applications.

Topics include:door types, door hardware, thresholds, weatherstripping, and overhead doors.
Hours: Class/Week -1
P.Lab/Week: 4.00
Pre-requisites:CAR 101, CAR 103, CAR 105, Program admission

CAR 131 CONCRETE FORMING (3)
Introduces materials and processes involved in construction practices using formed concrete.

Topics include:wall forms, on-grade curb forms, vertical pier and column forms, horizontal beam forms, above-grade slab system, and stair forms.
Hours: Class/Week -2
D.Lab/Week: 1.00
P.Lab/Week: 4.00
Pre-requisites:Provisional admission

CAR 132 SITE DEVELOPMENT (1)
Introduces the principles and practices of land surveying and the use of more com¬plex instruments. Emphasizes areas of transit use, use of electronic measuring devices, and the computation of bearings and angles.

Topics include:area calculation, EDM equipment utilization, and differential leveling.
Hours: Class/Week -1
D.Lab/Week: 1.00
Pre-requisites:MAT 101, CAR 107

CAR 134 COMMERCIAL CARPENTRY INTERNSHIP (4)
Provides students with occupation-based instruction that applies learned skills to actual work experience. Emphasizes students opportunities to practice finish work as learned in class and lab as part of the commercial carpentry specialization courses.

Topics include:application of commercial carpentry skills, appropriate employability skills, problem solving, adaptability to job equipment and technology, progressive pro¬ductivity, and acceptable job performance.
Hours: Class/Week -0
O.B.I/Week: 12.00
Pre-requisites:All non-elective courses required for completion of Residential Carpentry Specialization

CAR 135 STEEL RIGGING AND REINFORCING (1)
Introduces various methods, materials, and equipment used in the handling and rigging of steel components in a construction project. Emphasis is placed on use of proper safety techniques.

Topics include:calculation of rope strengths, knots, and standard hand signals.
Hours: Class/Week -1
Lab/Week: 0.00
Pre-requisites:Program admission

CAR 150 CARPENTERS MATHEMATICS (4)
Emphasizes mathematical skills that can be applied to the solution of occupational and technical problems.

Topics include:properties of numbers, fractions, decimals, percent, ratio and proportion, measurement and conversion, exponents and radicals, and geometric and technical formulas. Class includes lectures, applications, and homework to reinforce learning.
Hours: Class/Week -3
Lab/Week: 2.00
Pre-requisites:Entrance arithmetic score in accordance with approved DTAE admission score levels.

CAR 155 EXTERIOR METAL STUD FRAMING (3)
Designed to show the uses of metal as an alternative material in the framing of commercial and industrial and residential sites.

Topics include:deck framing, bearing walls and trusses, tools and materials, job site safety training, and safe use of hand and power tools.
Hours: Class/Week -2
Lab/Week: 3.00
Pre-requisites:CFC 100, CAR 150, Welding

CCA 100 CLINICAL CARE ASSISTING INTRODUCTION (2)
An introduction to the fundamental principles and practices of a clinical care assistant.

Topics include:orientation to the profession, ethics and law, CPR and first aid, safety and OSHA regulations, infection control, blood/air-borne pathogens, and communication skills.
Hours: Class/Week -1
P.Lab/Week: 3.00
Pre-requisites:Program admission

CCA 101 CLINICAL CARE ASSISTING - LABORATORY (6)
Introduces fundamental skills, concepts, procedures, techniques and equipment used in a clinical laboratory.

Topics include:Phlebotomy and skin punctures, point of care testing, EKG, quality control and laboratory safety.
Hours: Class/Week -4
P.Lab/Week: 6.00
Pre-requisites:CCA 100
Co-requisites:AHS 100, AHS 109

CCA 102 CLINICAL CARE ASSISTING - NURSING (3)
Introduces fundamental skills, concepts, procedures and techniques necessary for the basic delivery of health care in acute and long term facilities.

Topics include:bedside nursing care, room preparation, basic respiratory therapy skills and documentation.
Hours: Class/Week -2
P.Lab/Week: 3.00
Pre-requisites:CCA 100
Co-requisites:AHS 101, AHS 109

CCA 103 CLINICAL CARE ASSISTING - PRACTICUM (12)
Provides students with an opportunity for in-depth application and reinforcement for principles and techniques in clinical/medical job setting. This clinical practicum allows the student to become involved in a work situation at a professional level of technical application and requires concentration, practice, and follow through.

Topics include:phlebotomy/skin puncture, point of care testing, bedside nursing care, room preparation, EKG, basic respiratory therapy, and documentation.
Hours: Class/Week -0
P.Lab/Week: 0.00
O.B.I/Week: 36.00
Pre-requisites:CCA 101, CCA 102, EMP 100, ENG 101

CFC 100 SAFETY (1)
Provides a review of general safety rules and practices and provides students with information about state and federal regulations including OSHA Hazard Communication Standard and Material Safety Data Sheets (MSDS). Emphasis is placed on electrical, fire, lifting, and ladder and scaffolding hazards.

Topics include:overview of safety rules and regulations, protective equipment, barriers and barricades, flammable materials, electrical hazards, ladders and scaffolding, safety in trenches and excavations, and introduction to rigging.
Class/Week -1
Lab/week: 0.00
Pre-requisites: Provisional Admission

CFC 101 INTRODUCTION TO CONSTRUCTION (2)
This course covers orientation and introduction to construction technology dealing with building and facility maintenance, cabinetmaking, carpentry, construction management, masonry, plumbing and advanced plumbing.

Topics include:workplace expectations of quality of work performed, professional ethical standards, proper communication practices, working in teams, learning for success and life skills.

Class/Week -2
Lab/week: 0.00
Pre-requisites: Provisional Admission

CFC 102 PROFESSIONAL TOOL USE (3)
The course provides instruction in the use of professional tools for the construction trades. Emphasis will be placed on the safe use of each tool covered.

Topics include: layout and measuring tools, sawing tools, shaping and cutting tools, fastening tools, drilling and boring tools, finishing tools, jobsite setup and shop tool use.

Class/Week -2
D.Lab/week: 2.00
P.Lab/O.B.I: 3.00
Pre-requisites: Provisional Admission

CFC 103 MATERIALS & FASTENERS (3)
Introduces the fundamental array of building materials used in residential and commercial construction.

Topics include:concrete products, masonry materials, plumbing materials, fasteners, wood products, finishing materials, manufactured products for Construction and an introduction to estimation of products and services.

Class/Week -3
Lab/week: 0.00
Pre-requisites: Provisional Admission

CFC 105 PRINT READING FUNDAMENTALS (5)
Introduces the reading and interpretation of prints and architectural drawings for all the Construction Trades

Topics include:types of plans, scales, specifications, conventions, and schedules.

Class/Week 5
Lab/week: 0.00
Pre-requisites: Provisional Admission

CHM 191 CHEMISTRY I (5)
Provides an introduction to basic chemical principles and concepts, which explain the behavior of matter.

Topics include: measurement, atomic structure, chemical bonding, physical states of matter, nomenclature, and stoichiometry.
Hours: Class/Week -4
D.Lab: 0.00
P.Lab/O.B.I: 3.00
Pre-requisites: Program Admission level math achievement

CIS 101 KEYBOARDING
Credits: 3.00
Provides an introduction to the effective and efficient use of electronic machine keyboards. Manual dexterity is developed using microcomputers and machine driven exercises.

Topics include: touch typing skills, text formatting and manipulation.
Hours: Class/Week -1
Lab: 4.00
Pre-requisites: Provisional Admission

CIS 103 OPERATING SYSTEMS CONCEPTS (6)

Provides an overview of operating systems functions and commands that are necessary in a computer working environment.

Topics include: multiprogramming, multi-user systems, resource management, task command/control languages, and operating system utilization.

Hours: Class/Week -4
Lab: 4.00
Pre-requisites: SCT 100

CIS 105 PROGRAM DESIGN AND DEVELOPMENT (5)

Provides an emphasis on business problem identification and solution through systems of computer programs using such tools as structure charts, flowcharts, and pseudocode.

Topics include: problem solving process, fundamentals of structured programming, program development building blocks, fundamentals of file and report structure, and business application structure.

Hours: Class/Week -5
Lab: 0.00
Pre-requisites: SCT 100 or CIS 106

CIS 106 COMPUTER CONCEPTS (5)

Provides an overview of computers and information technology.

Topics include: computer history and terminology, data representation, data storage concepts, fundamentals of information processing, fundamentals of hardware operation, fundamentals of communications and networking, structured programming concepts, program development methodology, system development methodology, and computer number systems.

Hours: Class/Week -5
Lab: 0.00
Pre-requisites: None

CIS 112 SYSTEMS ANALYSIS AND DESIGN (6)

Provides a review and an application of systems life cycle development methodologies implemented by project teams.

Topics include: role of systems analysis and design, preliminary investigation, systems analysis phase, systems design phase, systems development phase, implementation and evaluation, and post-implementation systems operation.

Hours: Class/Week -4
Lab: 4.00
Pre-requisites: CIS 105, Programming language preferred

CIS 113 COBOL I (7)

Provides a study of the COBOL programming language to solve business applications.

Topics include: divisions, input/output operations, arithmetic operations, sequence verbs, conditional control, editing of input, and single level control breaks.

Hours: Class/Week -4
Lab: 6.00
Pre-requisites: Program Admission
Corequisites: CIS 105

CIS 114 COBOL II (7)

Reinforces and extends the concepts and applications provided in COBOL I.

Topics include: multi-level control breaks, elementary table processing, debugging techniques, elementary sorting, and sequential file processing.

Hours: Class/Week -4
Lab: 6.00
Pre-requisites: CIS 113

CIS 122 MICROCOMPUTER INSTALLATION AND MAINTENANCE (7)

Provides an introduction to the fundamentals of installing and maintaining microcomputers.

Topics include: identifying components and their functions, safety, installation procedures, troubleshooting techniques, and preventive maintenance.

Hours: Class/Week -1
Lab: 4.00
Pre-requisites: Provisional Admission

CIS 124 MICROCOMPUTER DATABASE PROGRAMMING (7)

Provides a study of database programming using microcomputer database management systems (DBMS) software packages.

Topics include: development of systems, structured programming techniques, data editing, and output design.

Hours: Class/Week -4
Lab: 6.00
Pre-requisites: SCT 100,CIS 103 or CIS 261

CIS 127 ADVANCED WORD PROCESSING & DESKTOP PUBLISHING TECHNIQUES (6)

Provides a study of word processing and desktop publishing.

Topics include: word processing fundamentals, desktop publishing fundamentals, advanced word processing concepts, development of macros, and presentation graphics fundamentals, and troubleshooting applications.
Hours: Class/Week -4
Lab: 4.00
Pre-requisites: SCT 100

CIS 128 SPREADSHEET AND DATABASE TECHNIQUES (7)

Provides a study of spreadsheets and databases.

Topics include: spreadsheet fundamentals, advanced spreadsheet concepts, development of macros, database management fundamentals, and advanced database management concepts.

Hours: Class/Week -4
Lab: 6.00
Pre-requisites: SCT 100

CIS 140 NETWORKING CONCEPTS (5)

Introduces networking technologies and prepares students to take the COMPTIA's broad-based, vendor independent networking certification exam, Network+. Covers a wide range of materials about networking, from careers in networking to local area networks, protocols, topologies, transmission media, and security. Focuses on operating network management systems, and implementing the installation of networks. It reviews cabling, connection schemes, the fundamentals of the LAN and WAN technologies, TCP/IP configuration and troubleshooting, remote connectivity, and network maintenance and troubleshooting.

Topics include: client-server architecture, relational model, SQL syntax, data modeling, database creation, data retrieval and data manipulation, installation and administration tools, storage management, user accounts management, remote servers management, and DBMS optimization.

Hours: Class/Week -5
Lab: 0.00
Pre-requisites: SCT 100

CIS 141 CLIENT / SERVER DATABASE MANAGEMENT (7)

Provides a study of networked database management systems.

Topics include: client-server architecture, relational model, SQL syntax, data modeling, database creation, data retrieval and data manipulation, installation and administration tools, storage management, user accounts management, remote servers management, and DBMS optimization.

Hours: Class/Week -4
Lab: 4.00
Pre-requisites: SCT 100

CIS 142 MULTIPLE NETWORKS AND WANS (7)

Provides a study of heterogenous networks with an emphasis on Wide Area Network components and the linking of networks with disparate operating system soft­ware and/or disparate hardware.

Topics include:networks, protocols, multiple protocol networks, bridges, routers, and integration of disparate networks.

Hours: Class/Week -4
Lab: 6.00
Pre-requisites: CIS 1140

CIS 143 NETWARE ADMINISTRATION (7)

Provides a study of NOVELL NetWare Administration.

Topics include:NetWare system, NetWare integrity and security, NetWare system and user account automation, NetWare file server, NetWare workstation, NetWare printing, NetWare communica­tions, and network software installation.

Hours: Class/Week -4
Lab: 6.00
Pre-requisites: CIS 140

CIS 144 NETWARE INSTALLATION AND CONFIGURATION (7)

Provides a study of planning, designing, and implementing a NOVELL NetWare network.

Topics include: network design, network planning, network implementation, installation of cabling and components, hardware installation, server and client NOS installation, and installation of application software.

Hours: Class/Week -4
Lab: 6.00
Pre-requisites:CIS 143

CIS 145 NETWARE DIAGNOSTICS AND TROUBLESHOOTING (7)

Provides a study in NetWare network diagnostics and troubleshooting.

Topics include:NetWare analysis methodology, troubleshooting the network, file server trou­bleshooting and analysis, troubleshooting the DOS workstation, troubleshooting network printing, protocol analysis, cable troubleshooting, network optimization and disaster recovery, and research tools.

Hours: Class/Week -4
Lab: 6.00
Pre-requisites:CIS 143, CIS 144

CIS 146 MICROSOFT NT ADMINISTRATION(7)

Provides a study of Microsoft NT administration.

Topics include:NT file system, NT integrity and security, NT system and user account automation, NT domains, NT trust relationships, NT directory replication, NT systems optimization,NT clients, NT printing, NT communications, and network software installation.

Hours: Class/Week -4
Lab: 6.00
Pre-requisites:CIS 1140

CIS 147 MICROSOFT NT INSTALLATION AND CONFIGURATION (7)

Provides a study of planning, designing, and implementing a Microsoft NT network.

Topics include:network design, network planning, network implementation, in­stallation of cabling and components, hardware installation, server and client NOS installation, and installation of application software.

Hours: Class/Week -4
Lab: 6.00
Pre-requisites:CIS 146

CIS 148 MICROSOFT NT DIAGNOSTICS AND TROUBLESHOOTING (7)

Provides a study in Microsoft NT network diagnostics and troubleshooting.

Topics include:analysis methodology, troubleshooting the network, NT server troubleshoot­ing and analysis, workstation troubleshooting, troubleshooting network printing, pro­tocol analysis, cable troubleshooting, network optimization and disaster recovery, and research tools.

Hours: Class/Week -4
Lab: 6.00
Pre-requisites:CIS 146, CIS 147

CIS 149 ADVANCED C++ PROGRAMMING (7)
Prerequisite: CIS 282 with a minimum grade of "C"
Introduces object oriented programming. Common elements of Windows applications will be discussed and created using C++ integrated development environment.

Topics include: object oriented programming, Windows applications, user interface design, capturing and validating input, event-driven programming design, conditional processing, and incorporating graphics.

Hours: Class/Week -1
Lab: 4.00
Pre-requisites: CIS 256

CIS 155 WORKING WITH MICROSOFT WINDOWS SOFTWARE (3)

Provides students with the interface concepts of Microsoft Windows software and the opportunity to develop software application skill in a wide range of business situations.

Topics include:getting started with Microsoft Windows, managing programs and files with Microsoft Windows, using Microsoft Windows write and paintbrush features, data transfer with Microsoft Windows, printing with Microsoft Windows, and customizing with Microsoft Windows.

Hours: Class/Week -1
Lab: 4.00
Pre-requisites:None.

CIS 156 INTRODUCTION TO THE INTERNET AND WIDE AREA NETWORKS (5)

Introduces the Internet, a nationwide computer network that links colleges, techni­cal institutes, businesses, and government agencies. Provides an excellent opportunity to understand, investigate, and explore the Internet and related wide area networks. The student will learn how to connect a PC to the Internet as well as how to use communications software to access the many resources available on the network.

Topics include: network fundamentals, Internet concepts, electronic mail, file transfer proto­col (FTP), Telnet, Internet gophers, and information services.

Hours: Class/Week -2
Lab: 6.00
Pre-requisites:sct 100

CIS 157 INTRODUCTION TO WINDOWS PROGRAM USING MICROSOFT VISUAL BASIC(7)

Introduces Microsoft Windows event-driven programming. Along with this new method of programming, common elements of Windows applications will be discussed. These elements will be created and manipulated using Microsoft’s Visual BASIC development environment.

Topics include:Windows applications, user inter­face design, capturing and validating input, event-driven programming design, con­ditional processing, file processing, and incorporating graphics.

Hours: Class/Week -4
Lab: 6.00
Pre-requisites: Program Admission
Co-requisites: CIS 105

CIS 158 NETWORKING I (5)

Provides an overview of networking theory and network operations.

Topics include:LAN terminology, network components, network systems software installa­tion, and LAN management.

Hours: Class/Week -4
Lab: 2.00
Pre-requisites:CIS 102

CIS 158 NETWORKING II(5)

Introduces the network operating system, printing services, multiple file server configurations, and network specific items.

Topics include: LAN standards, network operating systems, installing NOS, internetworking, workstation management, LAN file system, network printers, LAN management, network security, network trou­bleshooting.

Hours: Class/Week -4
Lab: 2.00
Pre-requisites:CIS 158, CIS 102

CIS 167 WORKING WITH WINDOWS 95/98 (7)

Introduces the student to Windows 95.

Topics include:Using the Windows 95 Desktop, working with a window, using menus and dialog boxes, using Windows 95 Help, shutting down Windows 95, starting and exiting applications, working with mul­tiple windows, using My Computer, using Windows Explorer, using the Recycle Bin, working with the Control Panel, customizing the Desktop, using WordPad, using Paint, working with multimedia, maintaining Windows 95, and printing with windows 95.

Hours: Class/Week -4
Lab: 6.00
Pre-requisites:CIS 155

CIS 169 MULTIMEDIA PRESENTATIONS (5)

Introduces the student to the principles and techniques of dynamic classroom presentations.

Topics include: screen design, working with templates, adding sound and video, delivering over the web, and student use of presentation software.

Hours: Class/Week -4
Lab: 2.00
Pre-requisites:Program Admission

CIS 214 DATABASE MANAGEMENT (6)

Provides an overview of the skills and knowledge of database application systems, which are used in business, government, and industry.

Topics include: models, structures, physical database, logical database, and accessing techniques.

Hours: Class/Week -1
Lab: 4.00
Pre-requisites: Provisional Admission

CIS 215 COBOL III (7)

Reinforces and extends the concepts and applications provided in COBOL II.

Topics include: random file processing, advanced table processing, and advanced sorting.
Hours: Class/Week -1
Lab: 4.00
Pre-requisites: Provisional Admission

CIS 216 COBOL IV(7)

Provides skills development in more advanced techniques of COBOL programming utilizing disk files.

Topics include:interactive processing and database processing.

Hours: Class/Week -4
Lab: 6.00
Pre-requisites:CIS 215
Co-requisites:CIS 214

CIS 2161 Introduction to SQL Programming (7)

A course designed to allow the student to solve common database retrieval problems through the use of the SQL Language that supports common databases such as SQL/Server, ORACLE, DB2, ACCESS and other database systems.

Topics include:Understanding database vocabulary, understanding object and relational database concepts, understanding and implementing SQL statements that retrieve, insert, update and delete data from multiple databases, design queries and sub queries, develop an understanding of union, and join operations, understand how to execute and implement database triggers

Hours: Class/Week -4
Lab: 6.00
Pre-requisites:SCT 100,CIS 105
Co-requisites:CIS 106

CIS 2191 Internet Business Fundamentals (5)

Internet Business Fundamentals teaches students how to access the Internet and the World Wide Web using a Web Brower as a general-purpose Internet application. Students will learn to use the Internet for e-mail, the World Wide Web, news-groups, Gopher, Veronica, File Transfer Protocol (FTP) and Telnet. Student will gain experience using and configuring both Netscape Navigator and Microsoft Internet Explorer to access rich multimedia data and objects as well as Java, Shockwave, and Active X content. A variety of Web-based search engines will be used to conduct advanced searches and learn the basics of project leadership, security, and e-business solutions. Students will also learn about business on the Internet, and how business research can help gain market intelligence.

Hours: Class/Week 5
Lab: 0.00
Pre-requisites:Program admission
Co-requisites:

CIS 2201 HTML Fundamentals(3)

HTML Fundamentals is designed to teach basic through intermediate concepts in Hypertext Markup Language (HTML) authoring, including forms, complex table design, graphic elements, and client-side image maps. Students will design inter-linking pages that incorporate, design, graphic elements, and client-side image maps. Students will design inter-linking pages that incorporate, in practical applications, a wide range of HTML tags and attributes.

Hours: Class/Week 2
P.Lab: 3.00
Pre-requisites:Program admission
Co-requisites:

CIS 2201 HTML Fundamentals(3)

HTML Fundamentals is designed to teach basic through intermediate conceps in Hypertext Markup Language (HTML) authoring, including forms, complex table design, graphic elements, and client-side image maps. Students will design interlinking pages that incorporate, in practical applications, a wide range of HTML tags and attributes.

Topics include:

Hours: Class/Week -2
Lab: 3.00
Pre-requisites:Program Admission
Co-requisites:

CIS 250 RPG PROGRAMMING(7)

Introduces programming business applications using the RPG programming language.

Topics include:introduction to RPG programming, input and output process­ing, arithmetic operations, edit codes/words, selection operations, control breaks, multiple control breaks, do loops, exception output, external files - physical and logi­cal, and sequential file access methods.

Hours: Class/Week -4
Lab: 6.00
Pre-requisites:Program Admission
Co-requisites:CIS 105

CIS 251 ADVANCED RPG PROGRAMMING(7)

Provides an emphasis on designing and writing programs using the RPG program­ming language.

Topics include: table and array processing, data validation,data struc­tures, interprogram communication, random file access methods, file updating, and interactive processing.

Hours: Class/Week -4
Lab: 6.00
Pre-requisites: CIS 250

CIS 252 INTRO TO JAVA PROGRAMMING (7)

Course designed to teach the basic concepts and methods of objected-oriented design and Java programming. Use practical problems to illustrate Java application building techniques and concepts. Develop an understanding of Java vocabulary. Create an understanding of where Java fits in the application development landscape. Create an understanding of the Java Development Kit and how to develop, debug, and run Java applications using the JDK and Notepad as an editor. Continue to develop student's programming logic skills.

Topics include: JAVA Language History, JAVA Variable Definitions, JAVA Control Structures, JAVA Methods, JAVA Classes, JAVA Objects, and JAVA Graphics.

CIS 253 BASIC PROGRAMMING(7)

Provides a study of the BASIC programming language on a microcomputer to solve business applications.

Topics include:programming from stated problems using BASIC language, array processing/sorting, string manipulation, and interactive pro­cessing.

Hours: Class/Week -4
Lab: 6.00
Pre-requisites:Program Admission
Co-requisites:CIS 105

CIS 254 BASIC PROGRAMMING II(7)

Emphasizes structured BASIC programming using advanced programming tech­niques.

Topics include:control break reporting, sequential file processing and main­tenance, direct file processing and maintenance, and multi-file references/updates.

Hours: Class/Week -4
Lab: 6.00
Pre-requisites:CIS 253

CIS 255 INTRODUCTION TO "C" PROGRAMMING (7)

Provides opportunity to gain a working knowledge of "C" programming. Includes creating, editing, executing, and debugging "C" programs of moderate difficulty.

Topics include: basic "C" concepts, simple I/O and expressions, I/O and control statements, and managing data and developing programs.


Hours: Class/Week -4
Lab: 6.00
Pre-requisites:Program Admission
Co-requisites:CIS 105

CIS 256 ADVANCED "C" PROGRAMMING (7)

Covers theory and practice in developing advanced skills in "C" programming.

Topics include: pointers, functions, arrays; file input/output; BIOS and system service level operations; and program design and development.


Hours: Class/Week -4
Lab: 6.00
Pre-requisites:CIS 255

CIS 257 PASCAL PROGRAMMING (7)

Provides a study of the PASCAL programming language with an emphasis on development of production programs for business.

Topics include:procedures and parameter passing, data typing, implementation of program controls, interactive programming,string manipulation, file handling, and debugging techniques and compiler options.

Hours: Class/Week -4
Lab: 7.00
Pre-requisites:Program Admission
Co-requisites:CIS 105

CIS 258 INTRODUCTION TO DATA COMMUNICATIONS (4)

Provides an introduction to data communications and networks.

Topics include:data formats, data transmission techniques, protocol and networks, codes and termi­nals, modem control, basic network concepts, and models and standards.

Hours: Class/Week -3
Lab: 2.00
Pre-requisites:SCT 100

CIS 259 BAL PROGRAMMING(7)

An introductory course in the functions, logic, and programming of mainframe computers using the Basic Assembler Language. Emphasis is placed on number sys­tems, programming of business applications, and analyzing contents of registers and memory dumps.

Topics include:computer concepts and number systems, assembly language structure, analyzing source and object code, programming for character and decimal data, and program development.

Hours: Class/Week -4
Lab: 6.00
Pre-requisites:Program Admission
Co-requisites:CIS 105

CIS 260 INTRODUCTION TO FOURTH GENERATION LANGUAGES (7)

Provides skills and knowledge required for use of fourth generation languages.

Topics include: fourth generation language, advantages and disadvantages, fourth generation language structure, and fourth generation language applications.

Hours: Class/Week -4
Lab: 6.00
Pre-requisites:CIS 105

CIS 261 INTRODUCTION TO MS-DOS(5)

Presents information and application principles for MS or PC DOS used in IBM or compatible microcomputers.

Topics include:DOS overview, file management, diskette management, deviceb management, fixed disk management, batch file creation, and batch file use.

Hours: Class/Week -2
Lab: 6.00
Pre-requisites:SCT 100 or CIS 106

CIS 263 CICS COMMAND LEVEL PROGRAMMING(7)

Provides a study of CICS command level programming concepts and applications. Emphasis is placed on gaining hands-on experience in writing CICS programs and mmaps.

Topics include:CICS concepts and basic mapping support, COBOL command level coding concepts, CICS table maintenance, and testing and debugging CICS pro­grams and assignments.

Hours: Class/Week -4
Lab: 6.00
Pre-requisites:One Year COBOL programming experience or CIS 216

CIS 264 NETWORKING III(5)

Provides students with advanced knowledge and skills related to network operating systems, wide area networking and network troubleshooting.

Topics include: wide-area network technologies and standards, advanced local area network operating systems, troubleshooting network hardware and software, and managing advanced networks.

Hours: Class/Week -4
P.Lab / O.B.I: 3.00
Pre-requisites:CIS 158, CIS 159

CIS 265 MICROCOMPUTER TROUBLESHOOTING(7)

Emphasizes the use of system theory and diagnostic routines to isolate failures, replace the defective module or subsystem, and verify proper operation.

Topics include:basic system theory, operating systems use, diagnostic programs, subsystem isolation, upgrading systems, preventative maintenance, and service reports completion.

Hours: Class/Week -4
Lab: 6.00
Pre-requisites:Program Admission

CIS 276 ADVANCED ROUTERS AND SWITCHES (6)

This course introduces LAN design, LAN switching and switch segmentation, advanced routing, and multiple protocol.

Topics include: a review of course content of CIS 2321 (Introduction to LAN and WAN) and CIS 2322 (Introduction to WANs and Routing), local area network (LAN) switching, virtual local area networks (VLANs), local area network (LAN) design, interior gateway routing protocols (IGRP), access control lists, and Novell IPX.

Hours: Class/Week -4
Lab: 6.00
Pre-requisites:Program Admission

CIS 277 WAN DESIGN (6)

This course emphasizes WAN design utilizing point-to-point protocol (PPP), integrated services digital network (ISDN), and frame relay.

Topics include: : a review of course content of CIS 2321 (Introduction to LAN and WAN) and CIS 2322 (Introduction to WANs and Routing), and CIS 276 (Advanced Routers and Switches), wide area network, wide area network design, point-to-point protocol, integrated services digital network (ISDN), and frame relay.
Hours: Class/Week -4
Lab: 4.00
Pre-requisites:CIS 142, CIS 258, CIS 276

CIS 280 SYSTEMS APPLICATIONS PROJECT (7)

A capstone course providing a realistic business experience for students working in a team to develop a complete systems project in a ten-week period.

Topics include:Project Management, Systems Design and Development, Interactive Screen/Menu Development, File Maintenance Programming, Program Design, Systems Documenta­tion, User Documentation, Presentation, and Demonstration.

Hours: Class/Week -4
Lab: 6.00
Pre-requisites: 2 Advanced Programming Languages, CIS 112, CIS 214, ACC 101, an operating systems course, and Network Fundamentals.

CIS 282 INTRODUCTION TO C++ PROGRAMMING (7)

Develops skills for the programmer to write programs using the language of C++. Emphasis is placed on utilizing the added feature of C++, which will be added to the skills mastered in Programming with C.

Topics include: functions, objects, classes, inheritance, overloading, polymorphism, streams, and containers.
Hours: Class/Week -4
Lab: 6.00
Pre-requisites:CIS 256

CIS 286 A+ PREPARATION (7)

Provides the student with fundamentals of configuring, installing, diagnosing, repairing, upgrading, and maintaining computers and their peripherals; fundamentally prepares the student for A+ certification.

Topics include: A+ Core Module, A+ DOS/Windows operating systems, PC hardware and configuration, peripherals, preventative maintenance, customer interaction, virus protection, safety and electrostatic discharge and networks.

Hours: Class/Week -4
Lab: 6.00
Pre-requisites:CIS 122

CIS 1140 NETWORKING FUNDAMENTALS (6)

Introduces networking technologies and prepares students to take CompTIAs broad-based, vendor independent networking certification exam, Network +. Covers a wide range of material about networking, from careers in networking to local area networks, wide area networks, protocols, topologies, transmission media, and security. Focuses on operating network management systems, and implementing the installation of networks. It reviews cabling, connection schemes, the fundamentals of both the LAN and WAN technologies, TCP-IP configuration and troubleshooting, remote connectivity, and network maintenance and troubleshooting.

Hours: Class/Week -4
Lab: 6.00
Pre-requisites:SCT 100 and CIS 106 or advisor approval

CIS 2128 INTRODUCTION TO DATABASES (7)

This course provides an introduction to the ORACLE database management system platform and to Structured Query Language (SQL) and ORACLE PL/SQL.

Hours: Class/Week -4
Lab: 6.00
Pre-requisites:SCT 100, CIS 105, CIS 106, Programming language

CIS 2129 DATABASE ADMINISTRATION (7)

This course enables the database student to be able to fine tune ORACLE databases.

Topics include:Topics include: ORACLE architectural components, ORACLE administration tools, ORACLE instances, creation of an ORACLE database, construct Data Dictionary views, Maintain the control file, Maintain the Redo Log File, Manage table spaces and data files, Understand relationships and impacts on storage structures, Manage tables, indexes and segments, maintain data integrity, manage users, profiles, privileges, roles, understand and use database auditing options, using National Language Support (NLS).

Hours: Class/Week -4
Lab: 6.00
Pre-requisites:CIS 2128 Introduction to Databases

CIS 2130 DATABASE BACKUP AND RECOVERY (7)

This course introduces participants to the critical task of planning and implementing database backup and recovery strategies. The class addresses backup and recovery techniques and examines various backup, failure, restore and recovery scenarios and generic backup, restore and recovery operations. Through hands-on exercises, participants will examine backup methodologies based on business requirements in a mission critical enterprise. Participants will utilize multiple strategies and Oracle tools such as Recovery Manager to perform backups, and restore and recovery operations.

Hours: Class/Week -4
Lab: 6.00
Pre-requisites:CIS 2129, Architecture and Administration

CIS 2131 DATABASE PERFORMANCE TUNING (7)

This course enables the database student to be able to fine tune ORACLE databases.

Topics include:Topics include: Tuning overview, Oracle Alert and Trace Files, Utilities and Dynamic Performance Views, Tuning the Shared Pool, Tuning the Buffer Cache, Tuning the Redo Log Buffer, Database Configuration and I/O Issues, Using Oracle Blocks Efficiently, Optimizing Sort Operations, Tuning Rollback Segments, Monitoring and Detecting Lock Contention, SQL Issues and Tuning Considerations for different applications, Managing a Mixed Workload, Tuning with oracle Expert, Multithreaded Server Tuning Issues. This course enables participant to be able to fine tune ORACLE databases.

Hours: Class/Week -4
Lab: 6.00
Pre-requisites:CIS 2130

CIS 2132 ORACLE NETWORK ADMINISTRATION (6)

Oracle Network Administration covers the tools and techniques used when configuring an Oracle8i Database Management System in a network environment. Upon completion of this course, the students will have the skills necessary to configure and troubleshoot network connections to the Oracle8i database.

Hours: Class/Week -4
Lab: 4.00
Pre-requisites:CIS 2130 database Performance Tuning

CIS 2149 IMPLEMENTING MICROSOFT WINDOWS PROFESSIONAL (6)

Provides the ability to implement, administer, and troubleshoot Windows Professional as a desktop operating system in any network environment.

Hours: Class/Week -4
Lab: 4.00
Pre-requisites:CIS XXXX, an operating system course and CIS 1140 or Advisor Approval

CIS 2150 IMPLEMENTING MICROSOFT WINDOWS SERVER (6)

Provides the ability to implement, administer, and troubleshoot Windows Server as a member server of a domain in an Active Directory.

Hours: Class/Week -4
Lab: 4.00
Pre-requisites:Program Admission

CIS 2153 IMPLEMENTING WINDOWS NETWORK INFRASTRUCTURE (6)

Provides students with knowledge and skills necessary for new-to-product support professionals who will be responsible for installing, configuring, managing, and supporting a network infrastructure that uses the Microsoft Windows server family of products.

Hours: Class/Week -4
Lab: 4.00
Pre-requisites:CIS 2150 or CIS 2152

CIS 2154 IMPLEMENTING WINDOWS DIRECTORY SERVICES (6)

Provides students with knowledge and skills necessary to install, configure, and administer the Microsoft Windows Active Directory service. The course also focuses on implementing Group Policy and understanding the Group Policy tasks required to centrally manage users and computers.

Hours: Class/Week -4
Lab: 4.00
Pre-requisites:Program Admission

CIS 2155 DESIGNING A WINDOWS DIRECTORY SERVICES AND NETWORKING INFRASTRUCTURE (6)

Provides Microsoft senior support professionals and network architects with the knowledge and skills necessary to design a Microsoft Windows directory services infrastructure. Strategies are presented to assist the student in identifying the information technology needs of the organization, and then designing the Active Directory structure that meets those needs. In addition, this course provides senior support professionals with the information and skills needed to create a networking services infrastructure design that supports the required network applications. Each module provides a solution based on the needs of the organization. Some Microsoft Windows network solu­tions require a single technology, such as DHCP, to provide Internet Protocol (IP) address configuration support. In other situations, several technology options exist, such as Open Shortest Path First (OSPF), Routing Information Protocol (RIP) and Internet Group Management Protocol (IGMP), to design an IP routing scheme.

Hours: Class/Week -4
Lab: 4.00
Pre-requisites:CIS 1560 or CIS 2154

CIS 2191 INTERNET BUSINESS FUNDAMENTALS (5)
CIS 106, CIS 1140, & SCT 100 with a minimum grade of "C" in each course
Internet Business Fundamentals teaches students how to access the Internet and the World Wide Web using a Web Brower as a general-purpose Internet application. Students will learn to use the Internet for e-mail, the World Wide Web, news-groups, Gopher, Veronica, File Transfer Protocol (FTP) and Telnet. Student will gain experience using and configuring both Netscape Navigator and Microsoft Internet Explorer to access rich multimedia data and objects as well as Java, Shockwave, and Active X content. A variety of Web-based search engines will be used to conduct advanced searches and learn the basics of project leadership, security, and e-business solutions. Students will also learn about business on the Internet, and how business research can help gain market intelligence.

Hours: Class/Week -4
Lab: 6.00
Pre-requisites:Program Admission

CIS 2201 HTML FUNDAMENTALS (3)
CIS 106, CIS 1140, & SCT 100 with a minimum grade of "C" in each course
HTML Fundamentals is designed to teach basic through intermediate concepts in Hypertext Markup Language authoring, including forms, complex table design, graphic elements, and client-side image maps. Student will design inter-linking pages that incorporate, design, graphic elements, and client-side image maps. Student will design inter-linking pages that incorporate, in pratical applications, a wide range of HTML tags and attributes.


Hours: Class/Week -4
Lab: 6.00
Pre-requisites:Program Admission

CIS 2156 DESIGNING A SECURE WINDOWS NETWORK (6)

Provides students with the knowledge and skills necessary to design a security framework for small, medium, and enterprise networks by using Microsoft Windows technologies.
Hours: Class/Week -4
Lab: 4.00
Pre-requisites:CIS 1560 or CIS 215

CIS 2159 DESIGNING A WINDOWS DIRECTORY SERVICE INFRASTRUCTURE (5)

Provides the ability to analyze the business requirements and design directory service architectures. The architecture design could incorporate a unified directory services such as Active Directory and Windows NT domain; connectivity between and within sites, system components, and applications; and data replication such as directory replication and database replication.
Hours: Class/Week -5
Lab: 0.00
Pre-requisites:CIS 2154

CIS 2161 STRUCTURED QUERY LANGUAGE (SQL) (7)

A course designed to allow the student to solve common database retrieval problems through the use of the SQL Language that supports common databases such as SQL/Server, ORACLE, DB2, ACCESS and other database systems.

Topics include: Understanding database vocabulary, understanding object and relational database concepts, understanding and implementing SQL statements that retrieve, insert, update and delete data in a database, ability to implement aggregate and group SQL functions, create, edit and drop database tables, query data from multiple databases, design queries and sub queries, develop an understanding of union, and join opera­tions, understand how to execute and implement database triggers.

Hours: Class/Week -4
Lab: 6.00
Pre-requisites:SCT 100, CIS 106, CIS 105, and an operating stsyems course

CIS 2251 VISUAL JAVA (4)

Visual JAVA introduces students to visual programming with JAVA. Students will learn the fundamentals of the JAVA programming language and create JAVA programs with IBM Visual Age for JAVA or equivalent software. The course emphasizes designing a Graphical User Interface (GUI) via visual programming techniques, creating applets that will run on the World Wide Web, and creating applications that run on local machines. Students will create a fully functioning quiz program that tests users on local machines and the Web.
Hours: Class/Week -3
D.Lab: 2.00
P.Lab/O.B.I: 0.00
Pre-requisites:

CIS 2321 INTRODUCTION TO LAN AND WAN (6)

Provides students with classroom and laboratory experience in current and emerging network technology.

Topics include: safety, networking, network terminology and protocols, network standards, local area networks (LANs), wide area networks (WANs), Open System Interconnection (OSI) models, cabling, cabling tools, routers, router programming, Ethernet, Internet Protocol (IP) addressing, and network standards. Particular emphasis is given to the use of decision-making and problem-solving techniques in applying science, mathematics, communication, and social studies concepts to solve networking problems. In addition, instruction and training are provided in the proper care, maintenance, and use of networking software, tools, and equipment and all local, state, and federal safety, building and environmental codes and regulations.

Hours: Class/Week -4
D.Lab: 4.00
Pre-requisites:SCT 100

CIS 2322 INTRODUCTION TO WANs AND ROUTING (6)

This course provides instruction on performing basic router configuration and troubleshooting.

Hours: Class/Week -4
D.Lab: 4.00
Pre-requisites:CIS 2321

CIS 2421 INTERMEDIATE JAVA PROGRAMMING (7)

Programmers familiar with object-oriented concepts will learn how to develop Java™ applications. This course is used to teach students the syntax of the Java programming language and object-oriented programming with the Java programming language. The course uses the Java 2 Software Development Kit (SDK).

Hours: Class/Week -4
D.Lab: 6.00
Pre-requisites:CIS 2401, CIS 2411

CIS 2431 ADVANCED JAVA PROGRAMMING (7)

Advanced Java progress into advanced JAVA programming techniques and program development. Server side programming and client side programs are inte­grated. Students also learn debugging techniques and security.
Hours: Class/Week -4
Lab: 6.00
Pre-requisites:CIS 2421

CIS 2441 ADVANCED PROGRAMMING TOPICS (7)

Advanced application development techniques utilizing a variety of operating system platforms and environments.
Hours: Class/Week -4
Lab: 6.00
Pre-requisites:Advanced Programming languages

CIS 2554 INTRODUCTION TO LINUX/UNIX (6)

This course introduces the UNIX/Linux operating system skills necessary to perform entry-level user functions.

Topics include: History of UNIX/Linux, login and logout, the user environment, user password change, the file system, hierarchy tree, editors, file system commands as they relate to navigating the file system tree, UNIX/Linux manual help pages, using the UNIX/Linux graphical desktop, and command options. In addition, the student must be able to perform directory and file displaying, creation, deletion, redirection, copying, moving, linking files, wildcards, determining present working directory and changing directory locations.
Hours: Class/Week -4
Lab: 4.00
Pre-requisites:CIS 106 and SCT 100

CIS 2555 LINUX/UNIX ADMINISTRATION (6)

Covers UNIX/Linux operating system administration skills necessary to perform administrative functions.

Topics include: Installing UNIX/Linux, configuring and building a custom kernel, adding and removing software packages, managing run levels, managing users and groups, implementing security permissions, introduction to shell programming, managing and fixing the file system, managing memory and swap space, managing and scheduling jobs, managing system logs, understanding the boot process, system configuration files, file backup and restore, file compression, fault tolerance, and printing.


Hours: Class/Week -4
Lab: 4.00
Pre-requisites:CIS 2554

CIS 2556 LINUX/UNIX ADVANCED ADMINISTRATION (6)

Covers UNIX/Linux operating system advanced administration skills necessary to perform advanced administrative functions.

Topics include: understanding UNIX/Linux networking, managing network printing, configuring and troubleshooting TCP/IP on UNIX/Linux, configuring DHCP, DNS, a Web server, an FTP server, an E-mail server, and understanding NIS (yp) and NFS. Also, includes the following: understanding advanced security issues such as firewalls and NAT, using network commands, use of graphical system such as X Windows, sharing files and printers, and advanced shell programming.


Hours: Class/Week -4
Lab: 4.00
Pre-requisites:CIS 2555

CIS 2557 LINUX/UNIX SHELL SCRIPT PROGRAMMING (6)

Course covers Linux/UNIX shell programming techniques necessary for Linux/UNIX System Administrators to understand and create shell script programs in a Linux/UNIX environment.

Topics include: Shell variables, running shell script program, conditional processing, looping structures, arithmetic operators, logical operators such as AND, OR, and NOT,positional parameters and process variables, redirection, piping and standard error, use of backslash, quotes and back quotes.
Hours: Class/Week -4
Lab: 4.00
Pre-requisites:CIS 2556

COL 099 College Student Success Seminar (2)
This course syllabus is designed to assure students high academic success. It provides relevant information, outlines the course objectives, performance objectives, varied teaching methods that will be used, evaluation criteria for the course and work ethics, warranty claims, available student support services, expected accomplishments, and specific timelines.
Hours: Class/Week -2


COS 100 INTRODUCTION TO COSMETOLOGY THEORY (5)
Introduces the fundamental theory and practices of the cosmetology profession. Emphasis will be placed on professional practices and safety.

Topics include: state and local laws, rules, and regulations; hygiene and grooming; personality development and professional ethics; sterilization, sanitation, and bacteriology; chemistry fundamentals; safety; Hazardous Duty Standards Act compliance; and anatomy and physiology.
Hours: Class/Week 5
D.Lab: 0.00
Pre-requisites: Program Admission

COS 101 INTRODUCTION TO PERMANENT WAVING AND RELAXING (2)
Introduces the chemistry and chemical reactions of permanent wave solutions and relaxers.

Topics include:permanent wave techniques, chemical relaxer techniques, safety procedures, and application procedures on manikins.
Hours: Class/Week -1
D.Lab: 2.00
Co-requisites: COS 100 and MAT 100

COS 102 INTRODUCTION TO HAIR COLOR (4)
Introduces the fundamental theory of color, predisposition tests, color selection, and color application.

Topics include: basic color concepts, skin reactions, the color wheel, and color selection and application.
Hours: Class/Week -4
D.Lab: 1.00
Pre/Co-requisites: BAR 107 and MAT 100

COS 103 INTRODUCTION TO SKIN,SCALP, AND HAIR (2)
Introduces the theory, procedures, and products used in the care and treatment of the skin, scalp, and hair.

Topics include:treatment theory, basic corrective hair and scalp treatments, plain facial, products and supplies, and diseases and disorders.
Hours: Class/Week -2
D.Lab: 1.00
Pre-requisites: COS 100

COS 104 INTRODUCTION TO MANICURING AND PEDICURING (1)
Introduces the theory, procedures, and products used in the care of nails and cuticles.

Topics include:treatment theory, hand and foot anatomy, nail care implements, nail care supplies, plain manicure, and cuticle care.
Hours: Class/Week -1
D.Lab: 1.00
Pre/Co-requisites: COS 100

COS 105 INTRODUCTION TO SHAMPOOING AND STYLING (4)
Introduces the fundamental theory and skills required to shampoo and create shapings, pincurls, fingerwaves, roller placement, and combouts. Laboratory training in¬cludes styling training to total 20 hours on mannequins and 25 hours on live models without compensation.

Topics include: shampoo chemistry, shampoo procedures, styling principles, pincurls, roller placement, fingerwaves, combout techniques, skip¬waves, ridgecurls, and safety precautions.
Hours: Class/Week -2
D.Lab: 4.00
O-requisites: COS 100

COS 106 INTRODUCTION TO HAIRCUTTING (3)
Introduces the theory and skills necessary to apply haircutting techniques. Safe use of haircutting implements will be stressed.

Topics include:haircutting terminology, safety and sanitation, cutting implements, and haircutting techniques.
Hours: Class/Week -2
P.Lab: 3.00
Co-requisites: COS 100

COS 108 PERMANENT WAVING AND RELAXING (3)
Provides instruction in the application of permanent waves and relaxers. Precautions and special problems involved in applying permanent waves and relaxers will be emphasized. Application of perms and relaxers on live models is included.

Topics include:timed permanent wave, timed relaxer application, safety precautions, and Hazardous Duty Standards Act compliance.
Hours: Class/Week -2
D.Lab: 2.00
Pre-requisites: COS 101

COS 109 HAIR COLOR (6)
Presents the application of temporary, semi-permanent, and permanent hair coloring products.

Topics include:lash and brow tints, coloring products, safety precautions and tests, mixing procedures, and color selection and application.
Hours: Class/Week -4
D.Lab: 4.00
Co-requisites: COS 100, COS 101, COS 103, COS 105, COS 106, COS 108

COS 110 SKIN, SCALP, AND HAIR (3)
Provides instruction on and application of techniques and theory in the treatment of the skin, scalp, and hair. Emphasis will be placed on work with live models.

Topics include: implements, products and supplies, diseases and disorders, corrective hair and scalp treatments, facial procedures and manipulations, and safety precautions.
Hours: Class/Week -2
D.Lab: 2.00
Co-requisites:COS 100, COS 101, COS 103, COS 105, COS 106, COS 108, COS 109

COS 111 STYLING (3)
Continues the theory and application of hairstyling and introduces thermal techniques.

Topics include:blow dry styling, thermal curling, thermal pressing, thermal waving, braiding, safety, and cleaning and styling wigs and hairpieces.
Hours: Class/Week -1
D.Lab: 4.00
Co-requisites:COS 100, COS 101, COS 103, COS 105, COS 106, COS 108, COS 109, COS 110

COS 112 MANICURING AND PEDICURING (3)
Provides manicuring and pedicuring experience on live models.

Topics include:implements, products and supplies, diseases and disorders, manicure techniques, and plain pedicure.
Hours: Class/Week -1
D.Lab: 4.00
Co-requisites:COS 100

COS 113 PRACTICUM I (4)
Provides laboratory experiences necessary for the development of skill levels required to be a competent cosmetologist. The allocation of time to the various phases of cosmetology is prescribed by the Georgia State Board of Cosmetology. This course includes a portion of the hours required for licensure.

Topics include:permanent wav¬ing and relaxers; hair color and bleaching; skin, scalp, and hair; haircutting; styling; dispensary; manicure/pedicure; reception; safety precautions; and Hazardous Duty Standards Act compliance.
Hours: Class/Week -0
D.Lab: 12.00
Co-requisites:COS 108, COS 109, COS 110, COS 111, COS 112

COS 114 PRACTICUM II (8)
Provides laboratory experiences necessary for the development of skill levels required to be a competent cosmetologist. The allocation of time to the various phases of cosmetology is prescribed by the Georgia State Board of Cosmetology. This course includes a portion of the hours required for licensure.

Topics include:permanent wav¬ing and relaxers; hair color and bleaching; skin, scalp, and hair; haircutting; styling; dispensary; manicure/pedicure; reception; safety precautions; Hazardous Duty Stan¬dards Act compliance; advanced styling and shaping; industry concepts; and surviv¬ing in the salon (transition from class to employment).
Hours: Class/Week -5
P.Lab: 10.00
Co-requisites: COS 113

COS 115 PRACTICUM/INTERNSHIP I (4)
Provides experience necessary for professional development and completion of requirements for state licensure. Emphasis will be placed on the display of professional conduct and positive attitudes. The requirements for this course may be met in a lab¬oratory setting or in a combination of a laboratory setting and an approved internship facility.

Topics include: permanent waving and relaxers; hair color and bleaching; skin, scalp, and hair; haircutting; styling; dispensary; manicure/pedicure; reception; safety precautions; and Hazardous Duty Standards Act compliance.
Hours: Class/Week -0
OBI/Week: 12.00
Co-requisites: COS 113, COS 114

COS 116 PRACTICUM/INTERNSHIP II (5)
Provides experience necessary for professional development and completion of requirements for state licensure. Emphasis will be placed on the display of professional conduct and positive attitudes. The requirements for this course may be met in a lab-oratory setting or in a combination of a laboratory setting and an approved internship facility.

Topics include: permanent waving and relaxers; hair color and bleaching; skin, scalp, and hair; haircutting; styling; dispensary; manicure/pedicure; reception; safety precautions; Hazardous Duty Standards Act compliance; and state licensure preparation.
Hours: Class/Week -1
OBI/Week: 12.00
Co-requisites: COS 115

COS 117 SALON/SHOP MANAGEMENT (4)
Emphasizes the steps involved in opening and operating a privately owned cosmetology salon or barber/styling shop.

Topics include:planning a salon/shop, busi¬ness management, retailing, public relations, sales skills, and client retention.
Hours: Class/Week -3
D.Lab: 2.00
Pre-requisites: Program Admission; and COS 100

COS 118 NAIL PRACTICUM (7)
Provides additional experience in manicuring and pedicuring techniques required of applicants for state licensure. Emphasis is placed on performance, using live models in an actual or simulated occupational setting.

Topics include:manicure, nail repair, artificial nails, pedicure, and advanced and new techniques.
Hours: Class/Week -0
P.Lab: 0.00
OBI/Week: 21.00
Co-requisites: ENG 101, EMP 100

COS 119 NAIL CARE II (9)
Provides nail care experience on live models. Emphasis will be placed on the display of professional conduct and positive attitudes. The appropriate number of applications required by the state board of cosmetology in theory and service credit requirements for this course. Emphasis is placed on performance, using live models in an actual or simulated occupational setting.

Topics include:manicure/pedicure, nail repair, artificial nails, electric file, advanced/new techniques, HIV and OSHA updates, nail art, receptionist/dispensary, state board licensure preparation.
Hours: Class/Week -4
P.Lab: 0.00
OBI/Week: 15.00
Co-requisites: COS 117, COS 118

CUL 100 PROFESSIONALISM IN CULINARY ARTS(3)
Provides an overview of the professionalism in culinary arts and culinary career opportunities. Chef history, pride, and espirit d’corp are taught.

Topics include: cuisine, food service organizations, career opportunities, food service styles, and basic culinary management techniques.
Hours: Class/Week 3
D.Lab: 0.00
Pre-requisites: Provisional Admission

CUL 110 FOOD SERVICE SANITATION AND SAFETY(5)
Emphasizes fundamental kitchen and dining room safety, sanitation, maintenance, and operation procedures.

Topics include:cleaning standards, O.S.H.A. M.S.D.S. guidelines, sanitary procedures following SERV-SAFE guidelines, HACCAP, safety practices, basic kitchen first aid, operation of equipment, cleaning and maintenance of equipment, dishwashing, and pot and pan cleaning. Laboratory practice parallels class work.
Hours: Class/Week 2
D.Lab: 2.00
P.Lab: 6.00
Pre-requisites: Provisional Admission

CUL 112 PRINCIPLES OF COOKING(5)
Introduces fundamental food preparation terms, concepts, and methods. Course content reflects American Culinary Federation Educational Institute apprenticeship training objectives.

Topics include:weights and measures, conversions, basic cooking principles, methods of food preparation, and recipe utilization. Laboratory demon¬strations and student experimentation parallel class work.
Hours: Class/Week 2
D.Lab: 2.00
P.Lab: 6.00
Pre-requisites: Provisional Admission

CUL 114 AMERICAN REGIONAL CUISINE(5)
Emphasis is on terms, concepts, and methods necessary to American Cuisine food preparation. Course content reflects American Culinary Federation Educational Insti¬tute apprenticeship training objectives.

Topics include:kitchen aromatics, regional cooking principles and history, and methods of American regional food preparation. Laboratory demonstrations and student experimentation parallel class work.
Hours: Class/Week 2
D.Lab: 2.00
P.Lab: 6.00
Pre-requisites: CUL 110

CUL 116 FOOD SERVICE PURCHASING AND CONTROL(3)
Introduces principles and practices necessary to food, supply, and equipment selection, procurement, receiving, storage, and distribution.

Topics include:quality factors, food tests, pricing procedures, cost determination and control, selection, procurement, receiving, storage, and distribution. Laboratory demonstration and student experi¬mentation parallel class work.
Hours: Class/Week 2
D.Lab: 2.00
Pre-requisites: MAT 100

CUL 117 - Intro to Culinary Nutrition(5)

Topics include:
Hours: Class/Week 5
D.Lab: 0.00
Pre-requisites:

CUL 121 BAKING PRINCIPLES I(5)
Presents the fundamental terms, concepts, and methods involved in preparation of yeast and quick breads. Emphasis is placed on conformance of sanitation and hygienic work habits with health laws. Course content reflects American Culinary Federation Educational Institute cook and pastry apprenticeship training objectives, along with Retail Bakery Association training program.

Topics include:baking principles, baking ingredients, preparation of baked goods, baking sanitation and hygiene, and baking supplies and equipment. Laboratory demonstrations and student experimentation parallel class work.
Hours: Class/Week 2
D.Lab: 2.00
P.Lab: 6.00
Pre-requisites: Program Admission

CUL 122 BAKING PRINCIPLES II(5)
Presents the fundamental terms, concepts, and methods involved in preparation of baked products. Emphasis is placed on conformance of sanitation and hygienic work habits with health laws. Course content reflects American Culinary Federation Educational Institute cook and pastry apprenticeship training objectives, along with Retail Bakery Association training program.

Topics include:baking principles, baking ingredients, preparation of baked goods, baking sanitation and hygiene, and baking supplies and equipment. Laboratory demonstrations and student experimentation parallel class work.
Hours: Class/Week 2
D.Lab: 2.00
P.Lab: 6.00
Pre-requisites: CUL 121

CUL 127 BANQUET PREPARATION AND PRESENTATION(4)
Provides experience in preparation of a wide variety of quantity foods. Course con¬tent reflects American Culinary Federation Educational Institute apprenticeship training objectives.

Topics include:kitchen operational procedures, equipment use, banquet planning, recipe conversation, food decorating/styling, safety and sanitation, and pro¬duction of quantity food. Laboratory practice is provided.
Hours: Class/Week 1
D.Lab: 2.00
P.Lab: 6.00
Pre-requisites: CUL 112

CUL 129 FRONT OF THE HOUSE SERVICE(3)
Introduces the fundamentals of dining and beverage service.

Topics include:dining service/guest service, dining service positions and functions, international dining services, restaurant business laws, preparation and setup, table side service, and mer¬chandising. Laboratory practice parallels class work.
Hours: Class/Week 2
P.Lab: 3.00
Pre-requisites: CUL 100, CUL 110

CUL 130 PANTRY, HORS D'OEUVRES AND CANAPES(5)
Introduces basic pantry manger principles, utilization, preparation, and integration into other kitchen operations. Course content reflects American Culinary Federation Educational Institute apprenticeship pantry, garnishing, and presentation training objectives.

Topics include: pantry functions, basic garnishes, breakfast presentation buffet presentation, cold preparations, cold sandwiches, salads and dressings, molds, garnishes, and cold hors d’oeuvres. Laboratory practice parallels class work.
Hours: Class/Week 2
D.Lab: 2.00
P.Lab: 6.00
Pre-requisites: CUL 114

CUL 132 GARDE MANGER(5)
Emphasizes basic garde manger utilization and preparation of appetizers, condiments and hors d’oeuvres.

Topics include: hot and cold hors d’oeuvres; salads, dress¬ing, and relishes; sandwiches; patés and terrines; chaudfroids, geless, and molds; canapés; and garnishing, carving, and decorating. Laboratory practice parallels class work.
Hours: Class/Week 2
D.Lab: 2.00
P.Lab: 6.00
Pre-requisites: CUL 114, CUl 130

CUL 133 FOOD SERVICE LEADERSHIP AND DECISION MAKING(5)
Familiarizes the student with the principles and methods of sound leadership and decision making in the hospitality industry.

Topics include:basic leadership principles and how to use them to solicit cooperation, use of leadership to develop the best possible senior-subordinate relationships, the various decision making processes, the ability to make sound and timely decisions, leadership within the framework of the major functions of management, and delegation of authority and responsibility in the hospitality industry.
Hours: Class/Week 5
D.Lab: 0.00
Pre-requisites: Provisional Admission

CUL 137 NUTRITION AND MENU MANAGEMENT(5)
Emphasizes menu planning for all types of facilities, services, and special diets.

Topics include:menu selection, menu development and pricing, nutrition, special diets, and cooking nutritional foods. Laboratory demonstrations and student management and supervision parallel class work.
Hours: Class/Week 1
P.Lab: 6.00
Pre-requisites: CUL 100, CUL 110, CUL 112

CUL 215 CONTEMPORARY CUISINE I(5)
Emphasizes all modern cuisine and introduces management concepts necessary to the functioning kitchen.

Topics include:international cuisine, cuisine trends, kitchen organization, kitchen management, kitchen supervision, and competition entry. Laboratory demonstration and student experimentation parallel class work.
Hours: Class/Week 2
D.Lab: 2.00
P.Lab: 6.00
Pre-requisites: CUL 100, CUL 110, CUL 114

CUL 216 PRACTICUM/INTERNSHIP(12)
Provides the student with the opportunity to gain management/supervision experi¬ence in an actual job setting. Students will be placed in an appropriate restaurant, catering, or other food service business for four days per week throughout the quarter. On¬-the-job training topics include restaurant management/on-off premise catering/ food service business, supervisory training, and management training, on-off premise cater¬ing, hotel kitchen organization, kitchen management, restaurant kitchen systems, insti¬tutional food systems, kitchen departmental responsibilities, and kitchen productivity.


Hours: Class/Week 2
Lab/week: 30.00
Pre-requisites: CUL 114, CUL 116 or CUL 127

CUL 220 CONTEMPORARY CUISINE II(5)
Emphasizes supervision, and management concepts, knowledge, and skills necessary to restaurants serving contemporary cuisine.

Topics include:menu selection, layout and design, on/off premise catering, entrepreneurship, and small business management. Laboratory demonstration and student experimentation parallel class work
Hours: Class/Week 2
D.Lab: 2.00
OBI/Week: 6.00
Pre-requisites: CUL 215

CRJ 202 CONSTITUTION LAW(5)
Emphasizes those provisions of the Bill of Rights which pertain to criminal justice.

Topics include:characteristics and powers of the three branches of government, principles governing the operation of the Constitution, and Bill of Rights and the Constitutional Amendments.
Hours: Class/Week -5
D.Lab: 0.00
OBI/Week: 0.00
Pre-requisites:CRJ 101

CTR 101 Comp. Machine Shorthand Theory(5)

Topics include:
Hours: Class/Week -5
D.Lab: 0.00
OBI/Week: 0.00
Pre-requisites:CTR

CTR 102 CAT/Real Time (5)

Topics include:
Hours: Class/Week -5
D.Lab: 0.00
OBI/Week: 0.00
Pre-requisites:CTR

CTR 104 Comp Machine Shorthand Theory II(5)

Topics include:
Hours: Class/Week -5
D.Lab: 0.00
OBI/Week: 0.00
Pre-requisites:CTR

CTR 122 English for Court Reporters I(5)

Topics include:
Hours: Class/Week -5
D.Lab: 0.00
OBI/Week: 0.00
Pre-requisites:CTR

CTR 123 English for Court Reporters II (5)

Topics include:
Hours: Class/Week -5
D.Lab: 0.00
OBI/Week: 0.00
Pre-requisites:CTR